Chucksbp

I would say that if your motor is set at 1000 stepper resolution and you use the 1000 stepper resolution setting in the software along with the1.5 Micro steps along...

Why not just use the reversing button on the Clough42 display interface. You can change direction any time the lathe is stopped.

When you figure your steps keep in mind that I believe the steps are limited to 2000. I could be wrong about that, I believe that came up in a...

I'm not absolutely sure, but I would be leaning to a bad display board or possibly a poor connection at one of your crimps or soldier joints. I would first...

I thought i had damaged the board changing to a right angle plug but that wasn't the case, I believe it was just a bad board. I did find that...

I would have spares, the way things are going who knows what you can get and when. My first board came from Singapore and my second one from the UK,...

Yes You are defiantly missing a component on that board!! I would be contacting Jim for a replacement. 

No wonder it doesn't work!!!

This is the best I can do with the chip label, I'm 72 years old and with two sets of glasses and a magnifying glass i still couldn't read all...

You will set the lead screw setting to 8 TPI. You don't mention what your encoder resolution is, but the setting is 4 times the resolution so if you are...