Chad McCue

Why use OpenWRT when Raspbian would work well for this application?

@BrainSlayer MU-MIMO is supported on Linux PC with the below hardware spec. In the old days wireless routers were just low profile Linux PC with wireless adapters. I don't think...

Quote from: https://www.qnap.com/en/product/qwa-ac2600 > The QWA-AC2600 supports Dual Band Dual Concurrent (DBDC) for acting as an access point or a base station, adding more possibilities to your investment.

@BrainSlayer : The below document seems to indicate that ath10k has mu-mimo with hostapd https://wireless.wiki.kernel.org/en/users/drivers/ath10k/configuration#mu-mimo_configuration

@eduperez : We aren't arguing as far as I know. Just discussing mu-mimo. You never know maybe the ath10k source code could help speed this drivers development and stability.

https://github.com/Chadster766/McDebian

It's working awesome!

Which WRT model do you have?

Thanks I will start troubleshooting this on my WRT1900AC V1.

I checked the checksum and it matches your results. The update loaded fine on my WRT1900AC V1. Double check you have the below set in u-boot: ``` pri_kern_size=0x500000 alt_kern_size=0x500000 ```