GNS 530 Issues

[CaptainBobSim]

Design Issues:

• [ ] 3 traces are disconnected
• [ ] LED issue make sure resolved
• [ ] Add on new LEDS
• [ ] Photoelectric diode
• [ ] Remove the square hole?

Done Design Issues:

• [x] RNG Button
• [x] Position buttons correctly!!
• [x] PCB
• [x] SHELVED PCB receptacle for both?
• [x] Make GNS 530 have Arduino PCB and OUT IDC and IN IDC
• [x] Make sure 1 actually aligns to 1
• [x] No PCB Outline
• [x] Design Flippy button
• [x] Button Flippy location on PCB
• [x] Put in Zip Tie Cable reliefs
• [x] Single Rotary Encoder Holes in fake backing
• [x] RNG Button Rectangle hole on PCB
• [x] Remove material fro non PCB backing
• [x] Photoelectric sensor just for fun
• [x] Add holes for Display PCB on PCB
• [x] Make silkscreen to ensure IDCs go the correct way
• [ ] Label outgoing and incoming IDC
• [x] Dual gns 430 backing 2 options - one for single arduino and one for either GNS 430 or GNS 530 or symmetrical and rotate for other option 🤔 or flip board over?
• [ ] Make all buttons rectangle holes?
• [ ] Adjust heights of buttons and faceplate for holes

Prototype Issues:

• [x] Non PCB XY Define button width

Design Issues:

• [ ] Heat Set Inserts

Decals:

• [ ] Laser Engraving Friendly Version

PCB Checklist

• [x] Ground Plane on bottom
• [x] "Stay Spicy ✈" airplane :)
• [x] Autoroute Traces
• [x] Write Version Number on PCB
• [x] CaptainBobSim.com
• [ ] Write all component names and Pins
• [x] Write resistor values: 150Ω red 100Ω white (at 5V!) 50Ω for sharing 4 white
• [x] Write Changelog - Top right, size 2.54mm Changelog V1.0 Initial Design (Date)

Publishing Tasks:

• [ ] Put Partslist in ReadMe Initialize in the BOM (Private) then copy to the ReadMe and video description

• [ ] Add Wiring diagram PNG (Also embed in video)

• [ ] Rotate and export all STLs using Prusa for easy printability (no slicer rotate)

• [ ] Mounting Template .DXF and maybe PDF

• [ ] Attach .STEP and .f3d

• [ ] MobiFlight .mfmc file

• [ ] FS2020 Mobi .mcc

• [ ] X-Plane Mobi .mcc

• [ ] Take pictures

• [ ] Printables https://www.printables.com/model/create The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Instrument Find BOM in video description.

• [ ] Tweak the ReadMe

  • [ ] Video Here
  • [ ] Buy it as a Kit/Assembled
  • [ ] Pinout?

• [ ] Follow steps on product central https://www.notion.so/captainbobsim/Product-Central-fe05d96d32074a269806f0e77462978f

• [ ] Thumbnail for Video

• [ ] Add links to video

•