CRServoF

CRServoF copied to clipboard

Adding ESP32 S2 support target hw: lolin_S2_mini

8

@CapnBry Thanks for that code. I managed to get the CRSF link running on the wemos LolinS2_mini. The only challenge was to feed the used serial port in numbers to...

helicocrasher

Adding Failsafe Adjustment

3

Hello Bryan, Is there an easy way for the user to adjust failsafe settings? For example, could the ELRS team "simply" add the [failsafe WebUI](https://www.expresslrs.org/hardware/pwm-receivers/?h=failsafe#channel-mapping-and-failsafe) configurator to select non-PWM receivers?...

sk8board

Hello! I think there can be a good idea if you add the LED output in case the CH5 is at high state (~2000ms). This could be useful to indicate...

Z-Vladus

How to add support for flightMode?

1

Hello, I would like to add support for flight mode to the library, but I'm not quite sure how to do it. In the Arduino file, I added a function:...

PYJTERSTM32

add USB HID Joystick Support

5

Is there interest in adding a feature similar to the HID Joystick Support found in betaflight 3.4+? I am not expecting there will be enough desire to yield implementation. Thank...

pitts-mo

add PPM output option

1

any interest in adding PPM output instead of PWM? a lot of us still have old flight controllers like APM,mini APM,CC3D and alikes which can be use with PPM inputs...

axljackass

Any reason this will not work with raspberry pi pico

6

I am just asking because I have a few picos with me. Just want to make sure that Pico is powerful enough to do this.

mjsharma