In the old version, CF TYPE could be set to max here, has it been cancelled in the new version?

[aliuzzz]

Can we change average to max？

[TheWitness]

This is controlled by the HRULE rules vs. the consolidation function though I see the point when coming from 0.8.x.

[aliuzzz]

So, you means that it cannot be modified to MAX, but it will not affect the normal data results.The results are the same as the 0.8.x. This is important to me and I hope to receive confirmation

[TheWitness]

There is a custom aggregation method for max of max. Here are the available aggregations group by those that are identical. There are duplicates.

• current - Current from AVG
• max - Max from MAX
• total, all_max_current - Total from AVG
• total_peak, all_max_peak - Total from MAX
• aggregate, aggregate_sum - Total from AVG
• aggregate_peak, aggregate_max, aggregate_sum_peak - Total from MAX
• aggregate_current - Total from AVG
• aggregate_current_max - Total from MAX

Let me know if any of these get you to where you want to go?

[aliuzzz]

aggregate_peak, aggregate_max, aggregate_sum_peak - Total from MAX

[aliuzzz]

Also, do different aggregation methods affect the results of the csv table? I created an aggregation graph that aggregates several graphs using the "Interface - Traffic (bits/sec, 95th) " template. But the total column always matches the inbound traffic, while the 95 percentile on the graph will display normally according to the difference between inbound and outbound