[Help wanted] Simple clock testing

[CTCaer]

I need to collect info about a specific clock so any help is appreciated since every chip is different.

The test is simple. You inject or launch the payload from the following zip and run clk_test_light. clk_test_v0.4.zip At some point it will either show Error or it will just hang.

Please report the following:

• number, asterisks
• Error or Hanged
• SoC Speedo (0) from Console Info -> HW Info

For example if screen says 98 ***.., it hanged instead of showing Error and SoC speedo is 1650 you report

• 98, 3
• hanged
• 1650

If you get a hang/crash you can shut off the device by holding POWER for 6 seconds. If not bored you can also run the heavy test but have in mind that you might miss the number if soc hangs or if the test crashes.

EDIT: If you get a hekate panic or total soc crash/hang, rerun it and try to mark the last number or the transition number. Write Panic or SOC hang as the reason it stopped.
Panic after or SOC hang after if it's not the number that actually crashed.

EDIT2: v0.3: Updated test since heavy was not actually heavy before.. Also added an extra test and improved another. 0.4: Fixed a bug.

[masagrator]

- 140, 3
- hanged
- 1645

[Sky7734]

• 95, 3
• hanged
• 1863
• Erista chip

Same results with heavy test even after the new 0.4 version.

[Ch3ck3rM0n]

Hi CTCaer, evil_santa wrote me you need some testings, here the result of all my consoles:

142, 3
Error
1692
Mariko (oled, 8gb modded)

143, 3
Eror
1697
Mariko (V2)

144, 3
Error
1710
Mariko (V2)

144, 3
Error
1648
Mariko (Lite)

141, 3
Error
1645
Mariko (Lite)

[Lightos1]

- 105, 3
- hanged
- 1991

(will post a second one later)

[Lightos1]

- 135, 0
- soc hang
- 1574

[CTCaer]

Can happen. Since you caught the transitioning number, just edit the message above and write the details into a bullet list. 0 for asterisks and soc hang for stop reason. (And yeah you need to force shut off in that case)

EDIT: added info about it in OP.

[Samybigio]

• 143, 3

• Error!

• 1702

• Mariko OLED

• 105, 3

• Hang

• 2002

• Erista

[CTCaer]

v0.3: Test updated since heavy was not actually heavy before.. Also added an extra test and improved another. v0.4: Fixed a bug.

[Ch3ck3rM0n]

v0.3: Test updated since heavy was not actually heavy before.. Also added an extra test and improved another. v0.4: Fixed a bug.

do you need the test again? or is it fine with already done once?

[th3-ne0undr5c0r]

Mariko v2

• 139, 3
• Error!
• 1635 SoC Speedo

[CTCaer]

do you need the test again? or is it fine with already done once?

@Ch3ck3rM0n if you are not bored, sure. you can edit your results like this 142/140, 3/4 (before/after) if there's a difference.

[Agjeococh]

Mariko v2

• 145, 3
• Error!
• 1739 SoC Speedo

[Ch3ck3rM0n]

do you need the test again? or is it fine with already done once?

@Ch3ck3rM0n if you are not bored, sure. you can edit your results like this 142/140, 3/4 (before/after) if there's a difference.

no changes.. did it :)

[Happylucky-yl]

Switch Lite 148, 3 - Light Error! 149, 0 - Heavy Hang! Soc speedo:1705

Switch OLED 148, 3 - Light Error! 147, 3 - Heavy Error! Soc speedo:1810

Switch V2 147, 3 - Light Error! Soc speedo:1768

Switch Lite 147, 3 - Light Error! Soc speedo:1765

Switch V2 145, 3 - Light Error! Soc speedo:1745

Switch V2 145, 3 - Light Error! 144, 3 - Heavy Error! Soc speedo:1727

Switch OLED 144, 3 - Light Error! 144, 3 - Heavy Error! Soc speedo:1688

Switch OLED 143, 3 - Light Error! Soc speedo:1738

Switch OLED 142, 3 - Light Error! Soc speedo:1747

Switch Lite 142, 3 - Light/Heavy Error! Soc speedo:1739

Switch V2 141, 3 - Light Error! 140, 3 - Heavy Error! Soc speedo:1631

Switch Lite 138, 3 - Light Error! 137, 3 - Heavy Error! Soc speedo:1671

More data will be added once ready later

[dominatorul]

Switch lite Light/Heavy: 141,3 Error! 1663 speedo

[TDRRmk2]

v2 Light: 139, 2 Error 1652 speedo

[WE1ZARD]

v2 light 145,3, error heavy 144,3, error soc speedo: 1727

[BrownTigerz]

Switch Lite Light 136 error Heavy 136.2 error 1549

Mariko OLED Light 140 error Heavy 138.3 error 1590

Mariko OLED Light 141 error Heavy 141 error 1598

[booshankles]

V1 erista with RCM Light: 103, 3 (***...) Hanged. 1990

Heavy: Same results.

I am using eos switchcraft to undervolt slightly tho also, not sure if that affects hekate and this test

[CTCaer]

So that dataset is nice. I'm prepping for phase 2 (probably final) of the test. Will post a new issue with it when I decide on the tests (it will be interactive and fast).

[Zaptyp]

Switch V1 (Erista T210) Light test:

101,0
Hanged
2051

Heave test:

101,0
Error? (Yellow text press any key... and hanged on this moment)
2051

[theofficialgman]

Switch V1

• 102, 3
• hanged
• 2009 (I think, SoC Speedo 0 (SoC Val) is the 3rd value now in the "CPU/GPU/SoC Speedo" row right?)

[CTCaer]

Yeah: CPU/GPU/SoC Speedo New Nyx has all the useless clutter removed from the names.

[CTCaer]

Thanks to everyone that participated. Phase 2 of the test is posted in https://github.com/CTCaer/hekate/issues/1167