Minecraft-Mod-Language-Package
Minecraft-Mod-Language-Package copied to clipboard
CFPAOrg
AE2 Stuff Unofficial 翻译提交
| 模组 | 🔗 链接 | :art: 相关文件 | |
|---|---|---|---|
| AE2 Stuff Unofficial | :mag: 源代码 | 🟩 MCMOD | :file_folder: 对比(Azusa) | 语言文件链接 |
:floppy_disk: 基于此 PR 所打包的资源包：
✔ ae2stuff Mod Domain 验证通过。
ℹ ae2stuff-1.12.2 语言文件验证通过。
ℹ ae2stuff-1.12.2 模组内语言文件验证通过。
🔛 Diff：
ae2-stuff-unofficial/1.12.2
| 英文 | 中文 |
|---|---|
| Crystal Growth Chamber | 晶体催生仓 |
| Advanced Inscriber | 高级压印器 |
| Wireless Connector | 无线接入器 |
| Wireless Hub | 无线接入中心 |
| Can connect to up to %s other Wireless Connectors | 最多可连接至%s个无线接入器 |
| Wireless Setup Kit | 无线设置工具 |
| Advanced Wireless Setup Kit | 高级无线设置工具 |
| Network Visualisation Tool | 网络可视化工具 |
| Network not connected | 未连接网络 |
| Adv. Wireless Kit Secondary | 高级无线设置工具次要功能键 |
| Sleeping | 休眠中 |
| Working | 工作中 |
| Connected to %s,%s,%s | 已连接至%s,%s,%s |
| Connected to | 已连接至 |
| Not Connected | 未连接 |
| Channels: %s | 频道：%s |
| Channels: | 频道： |
| Power Used: %s AE/t | 能量使用：%s AE/t |
| Power Used: | 能量使用： |
| Name: %s | 名称：%s |
| Name: | 名称： |
| Connections: %s / %s | 连接数：%s / %s |
| Connections: | 连接数： |
| Locked - Can't be removed with automation | 已锁定—无法自动移除 |
| Unlocked - Can be removed with automation | 未锁定—能够自动移除 |
| If no process is ongoing and middle slot is empty | 如果中间的槽非空或者正在进行中将不能处理 |
| Recipes | 配方 |
| Click Wireless Connector to bind | 右击无线接入器以绑定 |
| Bound to %s,%s,%s | 已绑定至%s,%s,%s |
| Click other Wireless Connector to connect | 右击另一个无线接入器以建立连接 |
| Connected to %s,%s,%s | 已连接至%s,%s,%s |
| Connection failed | 连接失败 |
| Both connectors must be in the same dimension | 两个无线接入器必须处于同一维度 |
| Bound connector does not exist | 绑定的接入器不存在 |
| Security violation - networks can't connect | 安全违规 - 网络无法连接 |
| Security violation - you are not allowed to modify this network | 安全违规 - 你无权修改此网络 |
| Target Hub is Full | 目标接入中心连接数已满 |
| Cannot link two Wireless Hubs | 无法将两个无线接入中心连接 |
| §aQueuing Mode | §a队列模式 |
| §aBinding Mode | §a绑定模式 |
| Queuing mode activated | 队列模式已激活 |
| Binding mode activated | 绑定模式已激活 |
| Added connector at %s,%s,%s to queue | 已将位于%s,%s,%s的接入器添加至队列 |
| Connector already in queue | 接入器已在队列中 |
| Click Wireless Connectors to add to binding queue | 右击无线接入器以将其添加至绑定队列 |
| Switch to Queuing Mode to add connectors to queue | 切换到队列模式以将接入器添加至队列 |
| Current wireless connectors in queue: | 当前队列中的无线接入器： |
| Current wireless connectors in queue to be bound: | 当前队列中待绑定的无线接入器： |
| Next connector in queue: %s,%s,%s | 队列中下一个接入器：%s,%s,%s |
| §oSneak right click to change mode between queuing and binding mode | §o潜行右击可在队列和绑定模式间切换 |
| No connectors found in queue. Try putting the tool into queueing mode and adding some | 队列中未找到接入器。将工具切换到队列模式来添加一些接入器 |
| Removed %s,%s,%s from queue | 已从队列中移除%s,%s,%s |
| %s hub slots added to queue | 已将%s个接入中心槽位添加至队列 |
| Queue cleared | 队列已清空 |
| Shift + %s + R-click to clear queue | Shift + %s + 右击以清空队列 |
| %s + R-click to connect to all free hub slots | %s + 右击以将队列连接至所有空闲的接入中心槽位 |
| %s + R-click to add all free hub slots to queue | %s + 右击以将所有空闲的接入中心槽位添加至队列 |
| Visualising network at %s,%s,%s | 正在可视化位于%s,%s,%s的网络 |
| Mode: | 模式： |
| Mode changed to %s | 模式已更改为%s |
| Show Everything | 显示所有 |
| Show Nodes | 显示节点 |
| Show Channels | 显示频道 |
| Show Channels and Nodes | 显示频道与节点 |
| Show P2P Links | 显示P2P连接 |
| %s / %s AE | %s / %s AE |
| AE2 Stuff Unofficial | AE2 Stuff Unofficial |
ae2-stuff-unofficial/1.12.2-keys
| Key | 英文 | 中文 |
|---|---|---|
tile.ae2stuff.grower.name |
Crystal Growth Chamber | 晶体催生仓 |
tile.ae2stuff.inscriber.name |
Advanced Inscriber | 高级压印器 |
tile.ae2stuff.wireless.name |
Wireless Connector | 无线接入器 |
tile.ae2stuff.wireless_hub.name |
Wireless Hub | 无线接入中心 |
tile.ae2stuff.wireless_hub.tooltip1 |
Can connect to up to %s other Wireless Connectors | 最多可连接至%s个无线接入器 |
item.ae2stuff.wireless_kit.name |
Wireless Setup Kit | 无线设置工具 |
item.ae2stuff.adv_wireless_kit.name |
Advanced Wireless Setup Kit | 高级无线设置工具 |
item.ae2stuff.visualiser.name |
Network Visualisation Tool | 网络可视化工具 |
ae2stuff.error.not_connected |
Network not connected | 未连接网络 |
ae2stuff.keybinding.adv_wireless_second |
Adv. Wireless Kit Secondary | 高级无线设置工具次要功能键 |
ae2stuff.waila.sleep.true |
Sleeping | 休眠中 |
ae2stuff.waila.sleep.false |
Working | 工作中 |
ae2stuff.waila.wireless.connected |
Connected to %s,%s,%s | 已连接至%s,%s,%s |
ae2stuff.top.wireless.connected |
Connected to | 已连接至 |
ae2stuff.waila.wireless.notconnected |
Not Connected | 未连接 |
ae2stuff.waila.wireless.channels |
Channels: %s | 频道：%s |
ae2stuff.top.wireless.channels |
Channels: | 频道： |
ae2stuff.waila.wireless.power |
Power Used: %s AE/t | 能量使用：%s AE/t |
ae2stuff.top.wireless.power |
Power Used: | 能量使用： |
ae2stuff.waila.wireless.name |
Name: %s | 名称：%s |
ae2stuff.top.wireless.name |
Name: | 名称： |
ae2stuff.waila.wireless.hub_connections |
Connections: %s / %s | 连接数：%s / %s |
ae2stuff.top.wireless.hub_connections |
Connections: | 连接数： |
ae2stuff.gui.lock.on |
Locked - Can't be removed with automation | 已锁定—无法自动移除 |
ae2stuff.gui.lock.off |
Unlocked - Can be removed with automation | 未锁定—能够自动移除 |
ae2stuff.gui.lock.note |
If no process is ongoing and middle slot is empty | 如果中间的槽非空或者正在进行中将不能处理 |
ae2stuff.gui.recipes |
Recipes | 配方 |
ae2stuff.wireless.tool.empty |
Click Wireless Connector to bind | 右击无线接入器以绑定 |
ae2stuff.wireless.tool.bound1 |
Bound to %s,%s,%s | 已绑定至%s,%s,%s |
ae2stuff.wireless.tool.bound2 |
Click other Wireless Connector to connect | 右击另一个无线接入器以建立连接 |
ae2stuff.wireless.tool.connected |
Connected to %s,%s,%s | 已连接至%s,%s,%s |
ae2stuff.wireless.tool.failed |
Connection failed | 连接失败 |
ae2stuff.wireless.tool.dimension |
Both connectors must be in the same dimension | 两个无线接入器必须处于同一维度 |
ae2stuff.wireless.tool.noexist |
Bound connector does not exist | 绑定的接入器不存在 |
ae2stuff.wireless.tool.security.network |
Security violation - networks can't connect | 安全违规 - 网络无法连接 |
ae2stuff.wireless.tool.security.player |
Security violation - you are not allowed to modify this network | 安全违规 - 你无权修改此网络 |
ae2stuff.wireless.tool.targethubfull |
Target Hub is Full | 目标接入中心连接数已满 |
ae2stuff.wireless.tool.twohubs |
Cannot link two Wireless Hubs | 无法将两个无线接入中心连接 |
ae2stuff.wireless.advtool.queueing |
§aQueuing Mode | §a队列模式 |
ae2stuff.wireless.advtool.binding |
§aBinding Mode | §a绑定模式 |
ae2stuff.wireless.advtool.queueing.activated |
Queuing mode activated | 队列模式已激活 |
ae2stuff.wireless.advtool.binding.activated |
Binding mode activated | 绑定模式已激活 |
ae2stuff.wireless.advtool.queued |
Added connector at %s,%s,%s to queue | 已将位于%s,%s,%s的接入器添加至队列 |
ae2stuff.wireless.advtool.queuederror |
Connector already in queue | 接入器已在队列中 |
ae2stuff.wireless.advtool.queueing.empty |
Click Wireless Connectors to add to binding queue | 右击无线接入器以将其添加至绑定队列 |
ae2stuff.wireless.advtool.binding.empty |
Switch to Queuing Mode to add connectors to queue | 切换到队列模式以将接入器添加至队列 |
ae2stuff.wireless.advtool.queueing.notempty |
Current wireless connectors in queue: | 当前队列中的无线接入器： |
ae2stuff.wireless.advtool.binding.notempty |
Current wireless connectors in queue to be bound: | 当前队列中待绑定的无线接入器： |
ae2stuff.wireless.advtool.connector.next |
Next connector in queue: %s,%s,%s | 队列中下一个接入器：%s,%s,%s |
ae2stuff.wireless.advtool.extra |
§oSneak right click to change mode between queuing and binding mode | §o潜行右击可在队列和绑定模式间切换 |
ae2stuff.wireless.advtool.noconnectors |
No connectors found in queue. Try putting the tool into queueing mode and adding some | 队列中未找到接入器。将工具切换到队列模式来添加一些接入器 |
ae2stuff.wireless.advtool.pop |
Removed %s,%s,%s from queue | 已从队列中移除%s,%s,%s |
ae2stuff.wireless.advtool.hub.queued |
%s hub slots added to queue | 已将%s个接入中心槽位添加至队列 |
ae2stuff.wireless.advtool.queueing.clear |
Queue cleared | 队列已清空 |
ae2stuff.wireless.tooltips.advtool.queueing.clear |
Shift + %s + R-click to clear queue | Shift + %s + 右击以清空队列 |
ae2stuff.wireless.tooltips.advtool.hubqols.binding |
%s + R-click to connect to all free hub slots | %s + 右击以将队列连接至所有空闲的接入中心槽位 |
ae2stuff.wireless.tooltips.advtool.hubqols.queueing |
%s + R-click to add all free hub slots to queue | %s + 右击以将所有空闲的接入中心槽位添加至队列 |
ae2stuff.visualiser.bound |
Visualising network at %s,%s,%s | 正在可视化位于%s,%s,%s的网络 |
ae2stuff.visualiser.mode |
Mode: | 模式： |
ae2stuff.visualiser.set |
Mode changed to %s | 模式已更改为%s |
ae2stuff.visualiser.mode.full |
Show Everything | 显示所有 |
ae2stuff.visualiser.mode.nodes |
Show Nodes | 显示节点 |
ae2stuff.visualiser.mode.channels |
Show Channels | 显示频道 |
ae2stuff.visualiser.mode.nonum |
Show Channels and Nodes | 显示频道与节点 |
ae2stuff.visualiser.mode.p2p |
Show P2P Links | 显示P2P连接 |
ae2stuff.waila.power |
%s / %s AE | %s / %s AE |
itemGroup.bdew.ae2stuff |
AE2 Stuff Unofficial | AE2 Stuff Unofficial |
ae2-stuff-unofficial/1.12.2-术语检查
| Key | 英文 | 中文 | 检查结果 |
|---|---|---|---|
tile.ae2stuff.grower.name |
Crystal Growth Chamber | 晶体催生仓 | ⚠ 术语异常 crystal => 水晶 |
tile.ae2stuff.wireless_hub.tooltip1 |
Can connect to up to %s other Wireless Connectors | 最多可连接至%s个无线接入器 | ⚠ 术语异常 up => 向上 |
ae2stuff.waila.wireless.power |
Power Used: %s AE/t | 能量使用：%s AE/t | ⚠ 术语异常 power => 力量 |
ae2stuff.top.wireless.power |
Power Used: | 能量使用： | ⚠ 术语异常 power => 力量 |
ae2stuff.waila.wireless.hub_connections |
Connections: %s / %s | 连接数：%s / %s | ✔ 术语 / => / |
ae2stuff.gui.lock.on |
Locked - Can't be removed with automation | 已锁定—无法自动移除 | ⚠ 术语异常 - => - ⚠ 术语异常 locked => 锁上 ⚠ 术语异常 locked => 上锁的, 已锁定的 |
ae2stuff.gui.lock.off |
Unlocked - Can be removed with automation | 未锁定—能够自动移除 | ⚠ 术语异常 - => - |
ae2stuff.gui.lock.note |
If no process is ongoing and middle slot is empty | 如果中间的槽非空或者正在进行中将不能处理 | ⚠ 术语异常 no => 否 ⚠ 术语异常 slot => 槽位 |
ae2stuff.wireless.tool.empty |
Click Wireless Connector to bind | 右击无线接入器以绑定 | ⚠ 术语异常 click => 生火 ⚠ 术语异常 click => 剪断 |
ae2stuff.wireless.tool.bound2 |
Click other Wireless Connector to connect | 右击另一个无线接入器以建立连接 | ⚠ 术语异常 click => 生火 ⚠ 术语异常 click => 剪断 |
ae2stuff.wireless.tool.failed |
Connection failed | 连接失败 | ✔ 术语 failed => 失败 |
ae2stuff.wireless.tool.dimension |
Both connectors must be in the same dimension | 两个无线接入器必须处于同一维度 | ✔ 术语 dimension => 维度 |
ae2stuff.wireless.tool.security.network |
Security violation - networks can't connect | 安全违规 - 网络无法连接 | ✔ 术语 - => - |
ae2stuff.wireless.tool.security.player |
Security violation - you are not allowed to modify this network | 安全违规 - 你无权修改此网络 | ✔ 术语 - => - |
ae2stuff.wireless.tool.targethubfull |
Target Hub is Full | 目标接入中心连接数已满 | ⚠ 术语异常 target => 标靶 |
ae2stuff.wireless.advtool.queueing.empty |
Click Wireless Connectors to add to binding queue | 右击无线接入器以将其添加至绑定队列 | ⚠ 术语异常 click => 生火 ⚠ 术语异常 click => 剪断 |
ae2stuff.wireless.advtool.queueing.notempty |
Current wireless connectors in queue: | 当前队列中的无线接入器： | ⚠ 术语异常 current => 当前分辨率 |
ae2stuff.wireless.advtool.binding.notempty |
Current wireless connectors in queue to be bound: | 当前队列中待绑定的无线接入器： | ⚠ 术语异常 current => 当前分辨率 |
ae2stuff.wireless.advtool.extra |
§oSneak right click to change mode between queuing and binding mode | §o潜行右击可在队列和绑定模式间切换 | ⚠ 术语异常 right => 右手 ⚠ 术语异常 click => 生火 ⚠ 术语异常 click => 剪断 |
ae2stuff.wireless.advtool.noconnectors |
No connectors found in queue. Try putting the tool into queueing mode and adding some | 队列中未找到接入器。将工具切换到队列模式来添加一些接入器 | ⚠ 术语异常 no => 否 |
ae2stuff.wireless.tooltips.advtool.hubqols.binding |
%s + R-click to connect to all free hub slots | %s + 右击以将队列连接至所有空闲的接入中心槽位 | ⚠ 术语异常 all => 全部 |
ae2stuff.wireless.tooltips.advtool.hubqols.queueing |
%s + R-click to add all free hub slots to queue | %s + 右击以将所有空闲的接入中心槽位添加至队列 | ⚠ 术语异常 all => 全部 |
ae2stuff.waila.power |
%s / %s AE | %s / %s AE | ✔ 术语 / => / |
ℹ 机器人的命令列表
- [ ] 🔄 勾选这个复选框来强制刷新
![cfpa-bot[bot] avatar](https://avatars.githubusercontent.com/in/181747?v=4 "Published by a pub.dev verified publisher"){kind=small}