BruceDevices
5ghz to 6ghz rf signals
Is your feature request related to a problem? Please describe. Kinda as I am unable to perform a dos attack on 5ghz wifis as deauth attacks on 5ghz mostly dont work wifi due to wpa 3 so jamming it would also be a way to do so however there is also no current support (that I know of) that supports these frequencies
Describe the solution you'd like I would like added support for 5ghz to 6ghz rf signals mainly 5.2 and 5.8ghz as these are mainly used
Describe alternatives you've considered
NoneAdditional context
None
Currently the ESP32 where Bruce is running only have antenna/resources for 2.4Ghz, this is not a software/firmware limitation but rather a hardware limitation. The development of Bruce is being studied for the ESP32-C5 board, this has 5Ghz Wifi but has other limitations regarding reduced processing compared to the ESP32-S3 which is used in most devices that run Bruce.
Ideally (if possible) bruce would also be able to support 5ghz - 6ghz rf signals in this case I mean similiar to the current nrf24 support but with 5ghz instead so we would be able to jam 5ghz wifi and many be even fpv footage at 5.8ghz
Ideally (if possible) bruce would also be able to support 5ghz - 6ghz rf signals in this case I mean similiar to the current nrf24 support but with 5ghz instead so we would be able to jam 5ghz wifi and many be even fpv footage at 5.8ghz
I am not aware of any easily accessible and developed SPI board that works at this frequency. So the short answer would be no.
