BruceDevices
port to CYD ESP32E_3.5" 320x480
A new version of CYD with a 3.5" display with a resolution of 320x480 has appeared on the market, which has ready-made SPI, I2C, UART speaker and battery outputs with built-in charging system.
On such a board you can connect all modules without the need for soldering. Additionally, it has a higher screen resolution
Is there a chance that there will be a bruce version for this board?
ESP32E_3.5inch, driver: ST7796, resistance touch, code E32R35T
Can you tell me if this device is working good with Launcher?
https://bmorcelli.github.io/Launcher/
Yes, launcher works perfect. Sometimes it's just the buttons that are in the wrong places, changing the orientation helps
I try to install on 3.5" TFT CYD but its not working well half screen shows , any one have solution for the 3.5" CYD pls ?
There is no version for 320x480 yet
any date of update pls?
I'm also waiting
I try to install on 3.5" TFT CYD but its not working well half screen shows , any one have solution for the 3.5" CYD pls ?
my cyd-3248S035C it's work
I try to install on 3.5" TFT CYD but its not working well half screen shows , any one have solution for the 3.5" CYD pls ?
my cyd-3248S035C it's work
Which software version did you use?
Yes, launcher works perfect. Sometimes it's just the buttons that are in the wrong places, changing the orientation helps
Launcher works at 480x320 on my my cyd-3248S035R as well. Uses entire screen now, although I am unsure if all options are actually selectable, as the "selected" item seems to jump around randomly.
Probably the touchscreen is misplaced, need to fix the orientation.. but I don't have the device to fix it
Probably the touchscreen is misplaced, need to fix the orientation.. but I don't have the device to fix it
Never mind. I just saw that you are in Brazil, So I sent you a $12 sponsor donation, which should be enough to buy this board. Current price in US dollars is $11.75 at this link: https://www.aliexpress.us/item/3256808473949829.html After getting to this page, click on the 3.5 inch model. Although the description says it's 320x240, I can assure you that it is a 480x320 resistive touchscreen.
This is definitely the device I want to run Bruce on. Lots of room to install extra sensors/emitters. Also already has a battery input and momentary power on button.
I was able to install this Marauder fork on my CYD 3.5 480x320 resistive and the full 480x320 display and the touchscreen works perfectly. https://github.com/Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display The author specifically notes having added this device. The magic sauce for this device appears to be here: https://github.com/Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display/tree/master/libraries/TFT_eSPI-CYD/3.5R/TFT_eSPI-master