Sebastian Gottschall
Sebastian Gottschall
@yuhhaurlin: i tested STA mode. not AP. AP works in VHT160 likelly. but i can run another test and setup WRT3200ACM as AP with VHT160 and check if clients are...
hostapd doesnt allow to configure vht160 at channel 36 for QCA9984. since in europe the channel specification doesnt allow vht160 at the lower band since some of them require DFS...
same for US. vht160 is not allowed for channel 36. so this isnt a good test
do you see the "@80" that means maximum 80 mhz the reason is that both lower bands have different properties. one is with DFS one is without
doesnt work for QCA9984. driver refuses to work on it. i dont need to wait for CAC. hostapd exists immediatly with error
nl80211: Failed to set channel (freq=5180): -22 (Invalid argument) Could not set channel for kernel driver Interface initialization failed
i can only test with the r7800 since i dont have 2 WRT3200ACM. so there might be a vendor interoperability issue or something like that. especially with the center1 and...
Interface ath0 ifindex 9 wdev 0x2 addr 14:91:82:b9:16:d4 type managed wiphy 0 channel 100 (5500 MHz), width: 160 MHz, center1: 5570 MHz txpower 23.00 dBm the client shows the same...
Station 14:91:82:b9:16:d4 (on ath0) inactive time: 22250 ms rx bytes: 70322179 rx packets: 73978 tx bytes: 6039857 tx packets: 49381 tx retries: 0 tx failed: 0 rx drop misc: 2...
all plain vht160. no 80+80 tested yet