BotoX

Which Linux distribution are you running?

oh noooooo, not again :V Check this issue: https://github.com/BotoX/ServerStatus/issues/15 Or just use one of the python clients if you can't get it working with bash.

Yes, all of the newer cameras come with these changes. If you have a signed firmware with an old bootloader you might be able to downgrade.

I'll look into it tomorrow.

Since there is no partition img in the firmware I'm going to need you to telnet to your device, run `cat /proc/mtd` and paste the output here.

Could you also print the output of the `mount` command? There is a "web" partition in the mtd list but no web.img in the firmware. However the firmware has a...

You're going to have to flash it with working firmware through the serial port using TFTP. See: https://ipcamtalk.com/threads/dahua-ipc-unbricking-recovery-over-serial-uart-and-tftp.16474/

Check your browser console for errors, also network tab for resources that didn't load.

I guess the NVR4XXX-4K**S2** is different from the normal NVR4XXX-4K. So someone would have to make a config for the new model and put it before the NVR4XXX-4K in config.py...

The simplest way would be to patch `lib/modules/pdc.ko` with a HEX editor. Change the String "SimpChinese" to "English"