Stephan

NTP Sync doenst happen during flash, its done on every boot. AWTRIX uses the the official esp32-hal-time libary https://github.com/Blueforcer/awtrix3/blob/f12513abce8e2b9fb8754df88258e0f03cad8fdd/src/ServerManager.cpp#L275 There is no difference between a dead battery or switching off...

Is Awtrix accessible after restart? Maybe the NTP client is unable to connect to the NTP server. Can you try another Timezone, or try it with the standard one from...

Is this also the case when you setup your Timezone an turn the clock Off and on with the two buttons?

Im unable to reproduce it. ive tested it with "AEST-10AEDT,M10.1.0,M4.1.0/3" wich is 01:53 now (GMT0BST,M3.5.0/1,M10.5.0) doesnt exist according to https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv then i discharged the battery, and after turning it on...

Im still unable to reproduce it. Also, thousands of other users don't seem to have this problem. As I said in my last post, you need to check whether something...

I doubt that as well. Awtrix now has a user base in the five-digit range. Having 6 apps with icons is nothing unusual otherwise I would have lots of issues...

If the gif was really corrupt, then AWTRIX would crash the first time and not after hours. I also recommend switching off all other automations and only running /customapps. Maybe...

Did you tried my other recommendations? And are you using a unifi WiFi?

II meant if you use any other APIs besides customapps.

As long as the problem is not reproducible, but only occurs with 2-3 users out of over 10k, I unfortunately have to assume a hardware defect. I hope you understand...