DCS-FA18C-UFC
DCS-FA18C-UFC copied to clipboard
BlueFinBima
Building for VR only
Great job planning on using your plans to build my own UFC. My issue I only fly in VR so the displays and the backlight are a high priority for me So can I build it without including those features will the buttons and switches still work? or should I redo the PCB for an Arduino?
Hi, I can't think of any reason why operation would be changed if the displays and LEDs were omitted. Probably a bunch of other components can be removed as well.
Good luck with the build.
On Thu, 9 Nov 2023 at 12:15, dwizle81 @.***> wrote:
Great job planning on using your plans to build my own UFC. My issue I only fly in VR so the displays and the backlight are a high priority for me So can I build it without including those features will the buttons and switches still work? or should I redo the PCB for an Arduino?
— Reply to this email directly, view it on GitHub https://github.com/BlueFinBima/DCS-FA18C-UFC/issues/8, or unsubscribe https://github.com/notifications/unsubscribe-auth/AENLAGHXIC2V6N3D4KIBFMDYDTCPTAVCNFSM6AAAAAA7EOV7BGVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4DKNBZHE3DGOI . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Hi, I can't think of any reason why operation would be changed if the displays and LEDs were omitted. Probably a bunch of other components can be removed as well. Good luck with the build. …
a couple more questions do you still have the part numbers for the 2 lower 8pin encoders you use seems the BOM is corrupted or compatible with digikey or https://easyeda.com/
Keep getting a compilation error using IDE 2.2.1
Compilation error: 'IotWebConfParameter' does not name a type; did you mean 'IotWebConfParameter_h'?
IotWebConf iotWebConf(apName, &dnsServer, &server, wifiInitialApPassword, CONFIG_VERSION); IotWebConfParameter ipAddressParam("IP address", "ipAddress", ipAddressValue, STRING_LEN, "text", NULL, "10.1.1.48"); IotWebConfParameter gatewayParam("Gateway", "gateway", gatewayValue, STRING_LEN, "text", NULL, "10.1.1.1"); IotWebConfParameter netmaskParam("Subnet mask", "netmask", netmaskValue, STRING_LEN, "text", NULL, "255.255.255.0");
any ideas on how to fix??
Keep getting a compilation error using IDE 2.2.1
Compilation error: 'IotWebConfParameter' does not name a type; did you mean 'IotWebConfParameter_h'?
IotWebConf iotWebConf(apName, &dnsServer, &server, wifiInitialApPassword, CONFIG_VERSION); IotWebConfParameter ipAddressParam("IP address", "ipAddress", ipAddressValue, STRING_LEN, "text", NULL, "10.1.1.48"); IotWebConfParameter gatewayParam("Gateway", "gateway", gatewayValue, STRING_LEN, "text", NULL, "10.1.1.1"); IotWebConfParameter netmaskParam("Subnet mask", "netmask", netmaskValue, STRING_LEN, "text", NULL, "255.255.255.0");
any ideas on how to fix??
I have not touched this code in a very long time. I do remember that IotWebConf package was a challenge because it kept changing, so it is possible, that it kept on moving after my last compilation. All I can suggest is to look at the documentation & examples for the level of the package you're using, and modify the source accordingly. I think trying to pick a historical level of the package which allows this to compile is probably going to take you longer.