🐛 [BUG] - Bootloader does not work on USB 3.0

[RC128tech]

Description

I used two SanDisk USB flash drives for my test install:

• 16 GB USB 2.0
• 64 GB USB 3.0

The USB 2.0 drive worked without problems. I also can install on the USB 3.0 drive, but it doesn't seem to boot from it. I made a reinstallation, still didn't boot. The BIOS is set to Legacy boot.

Add an additional entry in the installer menu 'Reinstall Bootloader'. It happens quickly that you skip the entry 'Install Bootloader'.

Best Regards

Reproduction steps

-

Screenshots

No response

Logs

No response

Category

Bootup

OS Version

No response