Blake C. Lewis
Blake C. Lewis
Paste the part of the config file, starting at try: import board to the line with 'thermocouple_type=' On Sun, Jun 15, 2025 at 10:24 AM Nikodemuzz ***@***.***> wrote: > *Nikodemuzz*...
How big are the wires in the thermocouple? Not the leads, but the actual wires in the thermocouple. A k type for a kiln will be like 1/8", S type...
I use relays with DC 12v coil. I run the 5v from the pi to a uln2803a (about $1 USD) and it switches the 12v. I think it can do...
A 2 second cycle is a bunch of switching. Probably not a good idea with relays. I do not know what would happen if it is set to 30 in...
Pictures I found with that relay show a small label on the back of the relay with coil voltage. I think the coil on the relay is a module and...
Skutt ceramic kiln controllers have a min climb rate. If it can't do or exceed the min then it throws an error and shuts down. On Mon, Jun 23, 2025...
send pictures of tc, pi, ssr, and max wiring? Got to get it into my mind. On Sun, Jul 27, 2025 at 2:37 PM rock1148 ***@***.***> wrote: > *rock1148* created...