NerdMiner runs out of KH/s

[ricardonegrao]

This problem is occurring and I have already reset the equipment several times.

Has anyone ever experienced this?

Is there a solution?

[MyOwn2C]

Either wrong settings, or you try to connect to 5G wifi. Nerdminer only works on 2.4G WiFi.

[ricardonegrao]

I am using 2G.

How would you know what is happening with this equipment?

[MyOwn2C]

Reset it and check your pool and port settings

[ricardonegrao]

This is my pool configuration:

Pool url pool.vkbit.com Pool port 3333 -3

[MyOwn2C]

Try resetting your wifi router. also check your wifi settings

[ricardonegrao]

I found the problem:

It was my BTC wallet address!

Thank you for your help.

[DanielErnany]

I found the problem:

It was my BTC wallet address!

Thank you for your help.

What was wrong with her? and how did you fix it? I have the same problem

[v1per4llbl4ck]

me the same i dont know how to change btc address. with sdcard dont work. i take my address from crypto.com in receve mode

[MyOwn2C]

me the same i dont know how to change btc address. with sdcard dont work. i take my address from crypto.com in receve mode

Boot to Wifi Manger and you can change the btc address

[MyOwn2C]

I found the problem: It was my BTC wallet address! Thank you for your help.

What was wrong with her? and how did you fix it? I have the same problem

Boot to Wifi Manger and you can change the btc address

[MARK345456]

ALGUEM SABE COMO REINICIAR O NERDMINER

[dwightmulcahy]

If you see your Nerdminer go to 0.00kH/s a lot, it could be the cable or power source you are using. I noticed that it bounces between 78kH/s and 0.00kH/s when I have it hooked up to my laptop, but when I plug it into a 1 amp or better power supply, it stays at the 78kH/s-ish mining all the time.

[ricardonegrao]

https://flasher.bitronics.store/

Em qui., 7 de mar. de 2024 às 16:20, MARK345456 @.***> escreveu:

ALGUEM SABE COMO REINICIAR O NERDMINER

— Reply to this email directly, view it on GitHub https://github.com/BitMaker-hub/NerdMiner_v2/issues/331#issuecomment-1984259183, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJTIS2OTWQZDGDCV2OYSK6TYXC4YFAVCNFSM6AAAAABDU7NYKWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBUGI2TSMJYGM . You are receiving this because you authored the thread.Message ID: @.***>

[IT-Cru]

From comments I would say this issue could be closed, because @ricardonegrao fixed his issue after updating to his working BTC wallet address.

[ben6608]

I also have the same problem. I updated the BTC wallet address and it didn't improve. I also changed the pool and reset the flash machine, but it didn't work.

[dwightmulcahy]

Have you tried a different power supply and cable to eliminate that?

[ben6608]

Yes, I tried changing the power supply and cables, but it didn’t work.

[MyOwn2C]

Yes, I tried changing the power supply and cables, but it didn’t work.

Check your settings:

• It can only connect to 2.4 Ghz wifi
• Make sure SSID and password are correct
• Make sure pool address, pool port and BTC wallet address are correct

[Loickrypto]

same issue . the problem was the btc adress . works well now

[Blackhawk17-USA]

See my Blog Post for my reply here - NerdMiner keep going down to 0 kh/s Thank you Dwight Mulcahy 💯