Bingo2023

I'm using it since November - works good. -> close

after disconnecting the Ethernet cable for some other installation work, HA found the SMA device. Reset etc was not needed, just the ethernet cable.... edit: SMA was found once but...

still not working with latest HA. Please reopen.

I'm running Node Red (with MQTT broker) on a Pi 3. I'm using the Pi-Image from Victron (Venus-OS). It is running very stable since 1 year. I started in the...

I used last summer the Victron CAN & Victron HW and it worked great.  here are the settings check especial the red marked. Also make sure that the Charger...

has some similarity to what I proposed some time ago: https://github.com/stuartpittaway/diyBMSv4ESP32/issues/199

You have developed the "diyBMS-CurrentShunt" to create these number/measurements. I don't like the idea of cutting&adding HW to the big power lines of the battery. I try to create a...

"diyBMS-CurrentShunt" sends its data intern/RS485/Modebus to the BMS. I'd like to experiment with the same idea, using the current sensor from the inverter and sending the values thru MQTT. The...

some inv send the Ah or even mAh, so the calc is done over there and only high level signals are transferred. But that is just the theory, I want...

OK I will try 5k com speed. Even if it helps, I think the reasons I mentioned are valid, why not use a 2 point Temperature control for that? That...