BierBot-Bricks-RaspberryPi
BierBot-Bricks-RaspberryPi copied to clipboard
BernhardSchlegel
Raspberry Pi powered beer brewing software. Supports mashing and fermentation. Works with smartphone, iPad, Mac, & PC.
Raspberry Pi mashing and fermentation controller
This code will turn you Raspberry Pi into a mashing or fermentation controller to automate all parts of your beer brewing process. Setup is super-simple. If you want to showcase your build, please reach out to us [email protected]. Oh: And please consider giving this repo a ⭐!
There is a extensive step-by-step tutorial how to build one yourself available on the BierBot.com Blog.
If don't want to do all the electronics/wiring yourself, check out this alternate WiFi switch firmware which runs the same software.
Key features
- Super easy setup and easy to try out (have a spare SD card?)
- Runs on Raspberry Pi (compatible Pis)
- Various kettle setups supported: BIAB, RIMS, HERMS.
- Free, open source license (GPL-v3)
- PDI controller that works with a simple and cheap non PWM/SSR relay and yet eliminates temperature overshoots.
- Mashing controller and fermentation controller, both with automatic timer control.
- Multi-language (German, English, Portugese, (soon) Finnish, tell us if you want to help!)
- Integrated recipe management: Set the temperature, the time, etc.
- Integrated logging: See your temperature log during the mash and export a PDF after brewing
- User authentication
- Access from everywhere
- Found a brewery and invite friends to share equipment, recipes, etc.
- Works perfectly on any Smartphone, Tablet, PC or Mac (or any web browser)
- Beer.XML import
- Configurable units for temperature (Celsius/Fahrenheit), gravity (°Plato, specific gravity), volume (Liters, Gallons), weight (Grams, pounds) etc.
- Control agitators, pumps, valves.
- Missing something❓ tell us! 🗨️
Screenshots
Sample Build
Mashing
:information_source: You can go to this screen manually by clicking on the temperature if a brew is active.
Fermentation
:information_source: You can go to this screen manually by clicking on the temperature if a brew is active.
Getting started
Open a commandline (Ctrl + Alt + T), navigate to your desired folder (e.g. cd ~/Desktop) and run the following commands:
git clone https://github.com/BernhardSchlegel/BierBot-Bricks-RaspberryPi.git
cd BierBot-Bricks-RaspberryPi
sudo pip3 install -r requirements.txt
sudo python3 setup.py
Setup will guide you through the installation. :information_source: Hint: You can accept the proposed default value by hitting Return.
Tested on Python 3.7
Raspberry Pi compatibility
The install script and software has been tested on the following Raspberry Pis (source):
| Raspberry Pi | 1 | 2 | 3 | 4 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Type | A | A+ | B | B+ | B | B v1.2 | A+ | B v.1.2 | B+ | B |
| ARM | ARMv6 (32 Bit) | ARMv7 (32Bit) | ARMv8 (64 Bit) | |||||||
| WiFi onboard | :x: | :x: | :x: | :x: | :x: | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
| Bluetooth onboard | :x: | :x: | :x: | :x: | :x: | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
| setupscript | :heavy_check_mark: | |||||||||
| software | :heavy_check_mark: | |||||||||
TL;DR: Get the cheapest one! Keep in mind you will need WiFi (so getting an Pi 3 or Pi 4 is probably worth the price). Also, Pi 3 and 4 support bluetooth - which is handy if you want to use it as bridge for you TILT.
If you happen to own one of the models with a blank cell, shoot us a message!
License
- The Code: GPL-3.0
- Orange Mash BierBot Logo: (c) by Bernhard Schlegel, all rights reserved.
Copyright (c) 2021-present, Bernhard Schlegel
Metadata
Owner
BernhardSchlegel
Metadata
Raspberry Pi powered beer brewing software. Supports mashing and fermentation. Works with smartphone, iPad, Mac, & PC.