Bastien R

I think you can use T2 or T3 connector to wire your thermistor. Then you need to specify what kind of thermistor you're using, like `#define TEMP_SENSOR_CHAMBER 1` if you're...

According to the documentation PC8 / PC9 / PE5 / PE6 are PWM capable but PC8 / PE5 / PE6 are already used for the 3 fans AND are 12V....

Same problem for me, terminal is however allowed in Security and Privacy

It use Webdav

Hey, guys, I managed to update the firmware, I proceeded as follows: -Download NodeMCU-PyFlasher-4.0 here : https://github.com/marcelstoer/nodemcu-pyflasher/releases -Locate the firmware.bin in your computer -Connect the BTT SD cloud with USB...

@oldman4U I'll try to make a PR for this

@SKOREIKO yes following the steps above

On my MMU2 (Chinese clone too), the idler makes a lot of noise when booting the MMU2, I guess it makes the home but it repeats the movement almost 10...

Same here. Is it possible that this is specific to macOs Catalina and the end of 32bit support??