Issue of images not displaying on the web

[10walnut]

Do I need to install a memory card on the development board? Why does my web interface not display any photos while the serial port indicates that a photo is being taken and sent? Also, can I just use a single OpenAI API endpoint?

[0x0101010]

I encountered the same issue as you. After numerous tests, I discovered that the Bluetooth on my computer was incompatible. It started working fine after I switched to a different computer. You might want to try using nRFConnect for mobile to test Bluetooth compatibility first. Hopefully, this will help resolve your issue.

[kowyo]

Same, I got stuck in here and I am using MacBook Air M2 with the latest macOS:

[rwmjhb]

me2,Has anyone solved this problem?

Same, I got stuck in here and I am using MacBook Air M2 with the latest macOS:

[rwmjhb]

I accidentally found a solution to this problem. When the esp32 is connected to the power supply, a red light will light up, but it will go out after a while. I guess it may have a power saving setting, so I tried Connect it immediately after it is powered on, and it will be successful.

[kowyo]

Hello @rwmjhb , do you use an external memory card in your esp32?

[rwmjhb]

Hello @rwmjhb , do you use an external memory card in your esp32?

nothing but only esp32. I bought Seeed Studio XIAO ESP32 S3 Sense,it takes 8MB PSRAM and 8MB Flash.

[kowyo]

I accidentally found a solution to this problem. When the esp32 is connected to the power supply, a red light will light up, but it will go out after a while. I guess it may have a power saving setting, so I tried Connect it immediately after it is powered on, and it will be successful.

Thank you, I solved it by following your method. However, I still have a high possibility of failure, which I think is due to the heat produced by the chip itself.

[HaoHoo]

我无意中找到了这个问题的解决方案。当esp32接通电源时，红灯会亮起，但过一会儿会熄灭。我猜它可能有省电设置，所以我尝试在开机后立即连接它，它会成功。

谢谢你，我按照你的方法解决了它。但是，我仍然有很高的失败可能性，我认为这是由于芯片本身产生的热量造成的。

Sure. The chip is so hot when running the code. I'll paste 散热片 later～

[10walnut]

I accidentally found a solution to this problem. When the esp32 is connected to the power supply, a red light will light up, but it will go out after a while. I guess it may have a power saving setting, so I tried Connect it immediately after it is powered on, and it will be successful.

Thank you very much, you were right. After using a fan to cool it down, it was able to successfully upload pictures.