Minimap location not correct

[ShadyNawara]

I tried using the minimap extension both through the demo and inside my own app but the output doesnt seem to be correct, I get a location in a nearby city. Also, when trying to use the geolocation extension activate(). The debug menu doesnt show up

[augustogoncalves]

is it an RVT model? can you open that file on Revit and check with the Location command?

[TD604]

@augustogoncalves - i have had the same issue with this, it seems to insert an additional offset if you have set your coordinate system up as will as the location.

when i set the location and remove the coordinate system (model at 0,0,0) the mini map shows it in the correct location however the minute i set a coordinate system the mini map shows the incorrect location. is it possible that it is taking an offset between the project base point and the survey point and offsetting the map location by that distance?

[augustogoncalves]

@TD604 , are you able to share a sample project that demonstrates the issue? you can send to [email protected] (instead of sharing here). Please mention this github issue.

[TD604]

@TD604 , are you able to share a sample project that demonstrates the issue? you can send to [email protected] (instead of sharing here). Please mention this github issue.

email sent, thanks for your help.