RUMBA32
RUMBA32 copied to clipboard
Aus3D
A powerful 32-bit 3D printer control board.
Hi, I saw that in the v1.1 board the option has been added to use UART with TMC220x chips. This is great, but unfortunately I have a version 1.0 board....
I'm using marlin bugfix-2.0.x branch, following the setup https://github.com/Aus3D/RUMBA32/wiki/Getting-RUMBA32-Up-&-Running#arduino-setup first I got the board config error:  I changed `BOARD_RUMBA32` to `BOARD_RUMBA32_V1_0` then I got errors: ``` Arduino: 1.8.13 (Windows...
Hi, there is a discussion between us in Italy, some people have found a German site where they sell Rumba32 for 50 € but made in China. What do you...
Hi, by having a look at the design I noticed that it is missing an important feature to correctly drive the TMC2208 and TMC2209 drivers directly from the MCU. In...
Collecting information for troubleshooting why PWM on FAN (PC9) isn't outputting the expected values when running Marlin bugfix-2.0.x. Suspect there is a conflict somewhere / the same timer is being...
Hi, I ask you if I can flash the board without pressing the boot and reset keys, since the card is in an awkward position in the printer. Thank you...
Hello, I am trying to upload Marlin to an AUS3D RUMBA32 V1.00 using PlatformIO in Visual Studio Code on a Mac. When the board is not in boot mode, I...
Hello, I have a Rumba32 v1.1 board How can I connect the MAX6675 board, so that I can use a thermocouple? In Marlin I have already changed the setting #define...
I currently have 2 rumba32 boards that can't seem to connect to the PC through the USB. The USB led lights up but not the 3v or 5v. There's no...
