RUMBA32
RUMBA32 copied to clipboard
Aus3D
A powerful 32-bit 3D printer control board.
Hello All!! I am currently building a 3D printer with a Rumba32 board and using Marlin 2.0 firmware. After following your tutorials and few issue comments, I am now able...
Hello All! I am a bit new to 3D printing electronics and recently have started to work on upgrading the hardware of a 3D printer from Rumba+ to Rumba32. I...
The purpose of this issue is to put info on this problem in one place for easy reference. ### What is the problem? As has been discussed in several issues...
Hi, just a question: Just testing and doing some small mods using VSC and platformio. Sometimes it would be more efficient compared to lot of log outputs. Ist it possible...
Hi Chris, Just wondering if you have plans to add a cartesian profile for Rumba32 to SampleSystems in Repetier dev2. would be definitely appreicated :) Kind regards Nuhwandah
I posted this here https://github.com/makerbase-mks/MKS-RUMBA32/issues/26 but have gotten no response so I'm hoping someone here will have an answer for finding a replacement mosfet for HE0...or if that is even...
I noticed a graphic/diagram error with RUMBA32_v1_1A_Graphic.png the power section (between EXP3 and HE0) shows 4 headers instead of 5 and also have 1 spacing between them this also seems...
I am trying to connect a AD595 thermocouple pcb. TEMP_SENSOR_0 -1 On the old 2560 board it could be connected to EXP3. and in the rumba pins.h file there was...
Hello there! I know, that the MKS Rumba32 board is not sold by your company, but maybe you can help me to solve my connection problem. I'm using Klipper as...
Hi @chrissbarr, after struggling for quite a while my 3D printer is working again, this time with a RUMBA32 v1.0 board. I followed your advice in another topic [https://github.com/Aus3D/RUMBA32/issues/35] to...
