RUMBA32 icon indicating copy to clipboard operation
RUMBA32 copied to clipboard

Published 20 hours ago • verified publisher icon Aus3D

BL Touch

Open danielbors72 opened this issue 4 years ago • 3 comments

how do i connect bltouch?

danielbors72 avatar Mar 12 '20 22:03 danielbors72

I would like to know as well.

phongshader avatar Apr 22 '20 16:04 phongshader

https://github.com/Aus3D/RUMBA32/issues/8

read this :)

leseaw avatar Apr 22 '20 16:04 leseaw

The Servo Header should do it, but if you have the version (which I have) that does not have a servo header, make the following changes to connect a BL Touch

in the pins_RUMBA32_common.h

change Z_MAX_PIN from PD10 to PA4 (just select a random unused pin)

change SERVO0_PIN from PA15 to PD10 this utilises the Z_MAX_PIN for the BL Touch like that has been used on some boards but be mindful to run the 5v for the BL Touch to a 5V power pin, as the endstop pins are configured for 3.3v by default

and do the usual changes to get the BL Touch working.

Celcius1 avatar Oct 04 '20 13:10 Celcius1