RUMBA32 icon indicating copy to clipboard operation
RUMBA32 copied to clipboard

Published 20 hours ago • verified publisher icon Aus3D

Flash without button press

Open lorenzing opened this issue 5 years ago • 3 comments

Hi, I ask you if I can flash the board without pressing the boot and reset keys, since the card is in an awkward position in the printer. Thank you very much for helping.

Lorenzo

lorenzing avatar Dec 19 '19 09:12 lorenzing

Great request, if the baord is installed inside the printer in a difficult place it is absurd to have to press the buttons on the pcb. On SKR have created a bootloader that solves this problem, the ST CPUs are usually sent in DFU mode with a usb command, because here there're three buttons? Uncomfortable!

robustini avatar Dec 19 '19 09:12 robustini

https://github.com/Arksine/LPC17xx-DFU-Bootloader/releases/tag/0.4.1?fbclid=IwAR2tZPzka_RSKFu7V2b9JSu-P-opkz3r-4v0mxCES-hfVaRA15Fyy6hMPMI

robustini avatar Dec 19 '19 15:12 robustini

MagoKimbra with his Mk4duo 4.4.0 has solved it. Command is M9999, but are needed github libraries for arduino ide. With stock one won’t work yet until ide libs will be upgraded.

https://marlinkimbra.it/configurator/v4_4_0/firmware_configurator.php

Winky1st avatar Dec 21 '19 00:12 Winky1st