Atmosphere-NX
Sleep Mode Not Functioning
Bug Report
What's the issue you encountered?
[ I've updated to the latest atmosphere and for a while was encountering no issues. A few days later, everytime I go into cfw and go into sleep mode, it never wakes up and I have to hold the power button to reset it.] [ No changes were made to atmosphere. ] [N/A]
How can the issue be reproduced?
[ * ] [ Downloading the latest Atmosphere seems to be the only cause for this issue.]
Crash Report
[N/A] [ N/A ] [N/A]
System Firmware Version
19.0.0
Environment?
- What bootloader (fusèe, hekate, etc) was Atmosphère launched by: hekate
- Official release or unofficial build:
- [ pre-release build ]
- [N/A]
- [ N/A ]
- [ N/A ]
- Do you have additional kips or sysmodules you're loading:N/A
- Homebrew software installed: [ * ]
- EmuMMC or SysNAND:
- [ SysNAND]
Additional context?
- Additional info about your environment:
- [ N/A ]
it's a HOS problem not atmosphère AS HAS BEEN STATED ON THE OTHERS ISSUES, please wait for Firmware 19.0.1 and the proper Atmosphère support to it.
This is not Atmosphère issue. Please close the issue and go to GBATemp or Discord for support
I'm on 19.0.0 and it boots to OFW in seconds and the sleep mode works. When I use AMS1.8.0 its takes along time to boot and if it goes to sleep mode it stays black screen and sometimes just reboots to hekate.
updating sys-clk fixed it for me
Could you please help me with that?
Assuming that you already have sys-clk installed on your switch and that the cause of the problem is the same mine was
Go to sys-clk github and download the latest release (sys-clk-2.0.1.zip), extract it and follow the instructions on the Readme file
updating sys-clk fixed it for me
This fixed it for me. Just go to sys-click release page download latest and drag and drop files if you already have sys-click setup from the past firmware
