lorawan-library-for-pico
lorawan-library-for-pico copied to clipboard
ArmDeveloperEcosystem
How to configure for use with SX1262 Semtech Shield
Hello,
I am trying to use this package for the SX1261/1262 with the Pico, but I am having a hard time trying to figure out how to get it to compile safely for the SX1262 instead of the SX1276; is this documented anywhere? If not, would this be possible to implement?
Thank you
Hi @NicoPowers,
This library currently does not support the SX1276, however pull request #15 is open to add support for it.
waveshare have a variant which supports sx1262 try here:-
https://www.waveshare.com/wiki/Pico-LoRa-SX1262
BUT, I have not gotten it to use my keys and have opened a support ticket. The hardware transmits ok - I can see it in my gateway but it isn't using the keys I put in the config.h for the otaa_temperature_led example.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
![stale[bot] avatar](https://avatars.githubusercontent.com/in/1724?v=4 "Published by a pub.dev verified publisher"){kind=small}
Remiss of me not to post that I fixed it. The problem was with the compilation of "sscanf" which wasn't scanning the keys properly (at all). I replace the sscanf with my own code and that fixed it. I reported the issue to Waveshare but don't know if they made changes to their code. In fact the demo code link on their wiki appears broken, If anyone want to know my fix let me know and I'll post it.
I posted my working code here. There were two problems: The original code didn't allow spi1 to be used. I fixed that and Sandeep Mistry has now amended his code. Second the pico compilation of sscanf didn't work as expected - I checked that with a really simple program and it failed so I wrote a replacement (simple) key scanner. It's all documented in the following
https://github.com/BNNorman/Waveshare-Pico-LoRa-SX1262-868M
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.