Is it possible to invert gpio "Enable bootloader entry on button (or gpio) state:". Missing information in the readme.md

[Hoeby]

I am using this option in katapult: "Enable bootloader entry on button (or gpio) state:"

I noticed, that i now have to pull the gpio HIGH, otherwise the board keeps starting up in katapult mode and not klipper mode. It is prefered, to invert this. That i don't have to place a jumper for working mode. Only place the jumper for updating mode.

The instructions on the readme.md file is missing text. Is it possible to also invert the "Enable bootloader entry on button (or gpio) state:", like is written with "Status LED GPIO Pin:"? Using the example as "Status LED GPIO Pin:" is written with the ! in front

Enable bootloader entry on button (or gpio) state: Enable to use a gpio to enter the booloader.
Button GPIO Pin: The Pin Name of te
Enable Status Led: Enables the option to select a status LED gpio.
Status LED GPIO Pin: The pin name for your LED. The Pin can be inverted if the LED is on when the pin is low. For example, the status LED Pin for a "blue pill" is !PC13.