picamera2_examples

picamera2_examples copied to clipboard

I have an flask application that calls picamera2 via uwsgi. When picamera2 is called an image is taken fine, but the resources are not released by at the end of...

ChrisDean

I have a module - imx462 - B0444. The website shows that it supports raw10/raw12, but with Picamera2, I just get sensor_modes with raw10. 

AlgorithmicIntelligence

Documentation -broken links due to renamed files on Github

1

Hi, Two links to GitHub on this documentation page are broken Documentation page: https://docs.arducam.com/Raspberry-Pi-Camera/Native-camera/PiCamera2-User-Guide/ broken link 1 : https://github.com/ArduCAM/picamera2_examples/blob/main/Autofocus_control.py fix? : https://github.com/ArduCAM/picamera2_examples/blob/main/AutofocusControl.py broken link 2: https://github.com/ArduCAM/picamera2_examples/blob/main/Manualfocus_control.py fix?: https://github.com/ArduCAM/picamera2_examples/blob/main/ManualfocusControl.py

KarolSongin

I tried using the above commands, but they do not seem to have any effect with the Arducam IMX519. Are there any plans for future implementation/support? See the following details...

OpenScanEu

was just going to note on the readme that it lists the dependencies for these examples, but several of the examples also need things like opencv installed

quitmeyer

If the property is read through this after auto focus or manual focus adjustment, the following is always displayed. **1. Auto-focus** ``` picam2.set_controls({"AfMode": 1 ,"AfTrigger": 0}) pos_vals = picam2.camera_controls["LensPosition"] print(pos_vals)...

hunkus