aravis
aravis copied to clipboard
AravisProject
PointGrey BFLY-PGE-14S2C-CS packet size adjustement support
arv_gv_device_auto_packet_size doesn't work with this device, while GevSCPSFireTestPacket seems to be supported and to work at least once:
Sources/aravis/build on wip/packet-size-check [$] took 3s ❯ ./tests/arv-camera-test -d device -j always
Looking for the first available camera
[GvDevice::new] Interface address = 192.168.0.114
[GvDevice::new] Device address = 192.168.0.96
[GvDevice::load_genicam] xml url = 'Local:GRS_GEV_v003.zip;7F1D0040;6C52' at 0x200
[GvDevice::load_genicam] Xml address = 0x7f1d0040 - size = 0x6c52 - GRS_GEV_v003.zip
[GvDevice::load_genicam] Zipped xml data
[GvDevice::new] Packet resend = yes
[GvDevice::new] Write memory = yes
[GvDevice::new] Legacy endianness handling = yes
vendor name = Point Grey Research
model name = Blackfly BFLY-PGE-14S2C
device id = 13125101
image width = 1296
image height = 1032
horizontal binning = 1
vertical binning = 1
payload = 1337472 bytes
exposure = 16650.4 µs
gain = 8 dB
[GvDevice::create_stream] Number of stream channels = 1
[GvDevice::auto_packet_size] Try packet size = 1400
[GvDevice::auto_packet_size] Try packet size = 810
[GvDevice::auto_packet_size] Try packet size = 515
[GvDevice::auto_packet_size] Try packet size = 367
[GvDevice::auto_packet_size] Try packet size = 293
[GvDevice::auto_packet_size] Try packet size = 256
[GvDevice::auto_packet_size] Try packet size = 238
[GvDevice::auto_packet_size] Try packet size = 229
[GvDevice::auto_packet_size] Packet size set to 1500 bytes
[GvStream::stream_new] Packet size = 1500 byte(s)
gv n_stream channels = 1
gv current channel = 0
gv packet delay = 3200 ns
gv packet size = 1500 bytes
56 frames/s - 74.9 MiB/s - 1 error
^C 60 frames/s - 80.2 MiB/s
Completed buffers = 116
Failures = 1
Underruns = 0
Here, initial check works:
wip/packet-size-check [$] took 3s ❯ ./tests/arv-camera-test -d device
Looking for the first available camera
[GvDevice::new] Interface address = 192.168.0.114
[GvDevice::new] Device address = 192.168.0.96
[GvDevice::load_genicam] xml url = 'Local:GRS_GEV_v003.zip;7F1D0040;6C52' at 0x200
[GvDevice::load_genicam] Xml address = 0x7f1d0040 - size = 0x6c52 - GRS_GEV_v003.zip
[GvDevice::load_genicam] Zipped xml data
[GvDevice::new] Packet resend = yes
[GvDevice::new] Write memory = yes
[GvDevice::new] Legacy endianness handling = yes
vendor name = Point Grey Research
model name = Blackfly BFLY-PGE-14S2C
device id = 13125101
image width = 1296
image height = 1032
horizontal binning = 1
vertical binning = 1
payload = 1337472 bytes
exposure = 16650.4 µs
gain = 8 dB
[GvDevice::create_stream] Number of stream channels = 1
[GvDevice::auto_packet_size] Current packet size check successfull (1500 bytes)
[GvStream::stream_new] Packet size = 1500 byte(s)
gv n_stream channels = 1
gv current channel = 0
gv packet delay = 3200 ns
gv packet size = 1500 bytes
^C 59 frames/s - 78.9 MiB/s
Completed buffers = 59
Failures = 0
Underruns = 0
By inserting a 1 or 2 second sleep between FireTestPacket commands, it seems to work, but not reliably.
When it does not, g_poll times out, with n_events == 0. None of the feature access command return an error.
May be a firmware issue ?
May be a firmware issue ?
Firmware updated with latest release, the issues persists.
Auto packet size adjustement does not display errors on Flycap Windows, but also does not seem to really adjust anything.