Ant118

when I press the button on the device, the device does not always appear


It is problem adapter firmware version 7.4.1. 6.10.7.0 build 435 - OK.

New error on Edge version: [2024-04-20 15:36:46] error: z2m: Adapter disconnected, stopping [2024-04-20 15:36:49] error: zh:ezsp:uart: --> Error: Error: {"sequence":5} after 4000ms [2024-04-20 15:36:49] error: zh:ezsp:uart: -!- break waiting (5)...

If i set adapter: ember then: [16:00:14] INFO: Preparing to start... [16:00:16] INFO: Socat not enabled [16:00:22] INFO: Starting Zigbee2MQTT... [2024-04-20 16:00:46] error: z2m: Error while starting zigbee-herdsman [2024-04-20 16:00:46]...

> Updating your adapter should fix it Update firmware? I am use Silabs Firmware Flasher web page. I don't see a newer firmware 7.3.1.0. 

Update to 7.4.1.0 Error: [16:11:40] INFO: Preparing to start... [16:11:44] INFO: Socat not enabled [16:11:54] INFO: Starting Zigbee2MQTT... [2024-04-21 16:12:45] error: zh:ezsp:uart: --> Error: Error: {"sequence":7} after 4000ms [2024-04-21 16:12:45]...

It is still working, but I have errors [45df7312_zigbee2mqtt_edge_2024-04-21T14-42-30.182Z.log](https://github.com/Koenkk/zigbee2mqtt/files/15052322/45df7312_zigbee2mqtt_edge_2024-04-21T14-42-30.182Z.log)

Device control is lost. Then stop Zigbee2mqtt. [45df7312_zigbee2mqtt_edge_2024-04-21T16-41-39.081Z.log](https://github.com/Koenkk/zigbee2mqtt/files/15052755/45df7312_zigbee2mqtt_edge_2024-04-21T16-41-39.081Z.log)

Downgrade to 6.10.3.0 build 297 [16:03:19] INFO: Preparing to start... [16:03:27] INFO: Socat not enabled [16:03:43] INFO: Starting Zigbee2MQTT... [2024-04-22 16:03:58] info: z2m: Logging to console, file (filename: log.log) [2024-04-22...