Anoxym

Stupid question, but how do you make the heating presets and operating modes appear? I added my thermostat as a climate entity, but I don’t have those options

I already have a thermostat but I haven't the preset on screen :  

From what I've seen on this teardown : https://blakadder.com/nspanel-teardown/ "You can notice that the headers are labelled BZ, RY1, RY2 and RY3. RY1 and RY2 are the existing relays and...

I ordered a few DS18B20 sensors and 4.7K pull-up resistors, I'll keep you updated on the results, but it should all be good. --> in example with Tasmota : https://github.com/arendst/Tasmota/discussions/15737

I confirm that the DS18B20 works on GPIO23. I connected to the test pad for GPIO23, a resistor pad for 3.3V, and the GND from the original NTC sensor. I...

No worries, it's just to keep track of it :)

We could use the calibration function of the NTC platform too Example configuration entry `sensor: - platform: ntc calibration: - 10.0kOhm -> 25°C - 27.219kOhm -> 0°C - 14.674kOhm ->...