Newer revisions of stealthburner x carriage mount are shorter than they should be

[KianSajjadi]

The 3rd revision of the mount had a change in the mounting height of the beacon causing the rapido nozzle to crash into the bed. Compare these two links with the same rev3 label: https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/blob/17229e6174104a9cb21d33a0cb7ea2c23882a710/Printers/Non_Annex_Printers/VORON_Printers/VORON_V2dot4/annex_dev-stealthburner_beacon_x_carriage/STLs/x_carriage_right_x1_rev3.stl https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/blob/4cb96361011dc72d3039e8c95225dbc5614b5aa5/Printers/Non_Annex_Printers/VORON_Printers/VORON_V2dot4/annex_dev-stealthburner_beacon_x_carriage/STLs/x_carriage_x1_rev3.STL

The first link has the correct beacon mounting height whereas the second link changes the mounting height of the beacon causing nozzle crashes. I think there should be a second version in the STLs where the original mounting height of the beacon is included for rapido users.