VSOL V2802RH and PLOAM PASSWORD IN HEX

[fluorfr]

Hello,

Do you have any idea how to enter the PLOAM PASSOWRD in HEX? (only ASCII by Telnet)

[Anime4000]

maybe you can try this? https://github.com/zry98/SFP-GPON-ONU#modules-using-rtl8672--rtl9601c-chipset

[fluorfr]

I saw this topic but I don't know how to proceed to replace the firmware. The UART link gives us access to a very limited shell.

[fluorfr]

We talk about it here in French: https://lafibre.info/remplacer-bbox/onu-externe-2-5gbe/120/

[Anime4000]

oh, we dont have the device to explore it, maybe try join this discord https://discord.com/channels/962437903454187550/962438081397522452

[fluorfr]

I cant join :( (i thinks is not an invitation link)

[AD2011]

Hey from where did you order this ONU? I am searching for a place to order this for a long time but still didn't find any websites selling this.

[qfdk]

Hello, @FluorFR, Thanks for you post.

I am also a Bouygues Telecom user and have purchased the V-Sol Model v2802RH to replace the Huawei HG8010H. The software version is 1.1.3, and I couldn't find any firmware updates available for version 1.0.7 as you mentioned in the post. I followed your provided configuration instructions, but I am unable to obtain an IP address.

V-SOL -> RouterOS : KO Huawei HG8010H -> RouterOS : OK

Currently, I am using the Huawei HG8010H and using RouterOS to strip VLAN tags. I coud got a ip I tried using the following commands, but they didn't work on LAN1 and changed the port_mapping in LAN2, it desn't work non plus. Could you share your config in the web interface ?

flash set GPON_SN HWXXXXX
// test for LAN2
flash set PORT_REMAPPING 0001000000000000
diag
gpon deactivate
gpon set password-hex 00000IMEI
gpon set serialnumber xxx
gpon activate init-state o1

Merci d'avnace !