Anime4000
I thought I broken config of DFP-34X-2C2 beyond repair, but it is somehow working, can you help me recover working config to restore it?
This was working great with factory firmware when i bought it, i thought i should try other firmwares here and I made a mistake of flashing HGU firmware instead of SFU one and on the way to fix my mistake I deleted mtd partition without nothing MACKEY.
Tried each firmware (some of them missing the options needed to work this thing with verizon us) and in my last attempt. I changed firmware to HGU one and tried resetting device with removing inserting fiber cable 6 times. Somehow it started working in SFU mode despite GUI is still HGU one, without any valid options, not even in state of connected and my mikrotik even got the ip adress of WAN.
I read somewhere here that there is 2 copies in the device, maybe there is way to restore working instance and not leave device in this messed up state.
OMCI software version 1 = V1.0-210702 OMCI software version 2 = V1.0-220923
If you need anything else from me let me know and I can provide.
@Anime4000 i did but i didnt backup mackey it was working empty.
Last night i reached out to manufacturer and requested latest firmware and updated to it, that even worked without mackey and afterwards i explained what i did and asked if it is possible to recreate mackey , they gave me new mac and mackey.
Everything is working right now with latest firmware.
Thank you for your response as well.
@tunayuyar Hello, i have same issue Can you share me the firmware file and manufacturer contact ?
@Miika2211 you should contact your device manufacturer, the one I bought was from Amazon, my device manufacturer was luleey. Try to find yours.