RTL960x
RTL960x copied to clipboard
VLAN not working after reboot
Hi, I have an ODI DFP-34G-2C2 with firmware v1.0-220923. I configured everything following this guide and it works very well with my ISP, thank you very much for this repository.
The only issue I encountered is with VLANs: everything works perfectly if I set the ONT in transparent mode and set the VLAN tag 835 directly on the router, but if I set the VLAN on the ONT and remove the VLAN from my router it only works until the ONT is rebooted, then to make it work again I have to re-apply the VLAN setting on the ONT.
can you telnet and show the results of:
omcicli mib get 84
omcicli mib get 171
omcicli mib get 256