Fake O5 Issue

[sudozid]

Hi,

I have a Zyxel PMG5617-R20B on Airtel (India). I'm having fake O5 issue and have tried many combinations on Realtek but none seem to work.

PON Status

Temperature | 59.820313 C Voltage | 3.372800 V Tx Power | 2.255692 dBm Rx Power | -30.000000 dBm Bias Current | 13.110000 mA

GPON Status ONU State | O5 ONU ID | 0 LOID Status | Initial Status

This is the mib info from Zyxel:

https://pastebin.com/mdUFaJpX

And this is the mib info I have on Realtek:

https://pastebin.com/6m9aEdd5

[sudozid]

Ok so I finally got it working after a lot of trial and error with the config.

Here is the mib info now:

https://pastebin.com/raw/YT11giWj

But there is a problem my speed is stuck at 16-20Mbps

https://beta.speedtest.net/result/14499126843.png

This is my ONU, it is Realtek but not in the sfp stick form

http://www.hsgq.com.cn/products_34/67.html

[jason-akw]

Rx Power | -30.000000 dBm

Your fiber signal is too weak. Also, try set the OMCI_TM_OPT to 2

[Shaan-hbli]

Ok so I finally got it working after a lot of trial and error with the config.

Here is the mib info now:

https://pastebin.com/raw/YT11giWj

But there is a problem my speed is stuck at 16-20Mbps

https://beta.speedtest.net/result/14499126843.png

This is my ONU, it is Realtek but not in the sfp stick form

http://www.hsgq.com.cn/products_34/67.html

Can you please share your config........

[BittorB]

i have the same issue with alcl olt but its some strange because the voip lan stablishes link and work but internet isnt working