Print-Tuning-Guide
Print-Tuning-Guide copied to clipboard
AndrewEllis93
The latest version of klipper has a problem with Resume macro support. When resume printing starts, the stepper motor directly reports an error. 
In TEST_SPEED.cfg `SMALLPATTERNSIZE` is missing `params.`, can't be set as a macro param.
Simply plugging the tachometer pin into a free endstop port doesn't work well. The pullup voltage on the endstop pins is too low compared to the 24V power to the...
Hi there, first time poster, so be gentle!! I've recently started using the Pause/Resume, Filament Swaps & Sensors Macro (https://ellis3dp.com/Print-Tuning-Guide/articles/useful_macros/pause_resume_filament.html). When the Filament Sensor signals, the print pauses and the...
I have a BTT SFS 2 and am having problems with my PAUSE macro I have decided to change my PAUSE macro to the one you publish as you mention...
 The grooves only appear on the latest top layers, I also checked the G code, it looks smooth, I observed the printing process and seemed to have found a...
There is no "Top Infill Pattern" setting in PrusaSlicer 2.6.0. I assume it's the one called "Top Fill Pattern" now. Also no "Monotic (Filled)" option available in the dropdown, only...
Was using your guide on the tach 3-pin hotend fan from Orion and noticed that Klipper wasn't reporting the RPM when attached to my Huvud CANBUS pcb when attached to...
In the Extrusion Multiplier Section for PrusaSlicer it is stated that "There is no way to set the EM per object. You will have to print the test objects one...
In the print surface prep you suggest: "Smooth PEI Consider scuffing it up with a :page_facing_up:[ kitchen scouring pad](https://www.scotch-brite.com/3M/en_US/scotch-brite/tools/~/Scotch-Brite-Heavy-Duty-Scour-Pad/?N=4337+3294529207+3294631680&rt=rud)." I would suggest you add that for ALL smooth surfaces a...
