Allwhey

I am also having this issue to an extremely large extent, using shared memory. My committed ram pool spikes from around 20~ GB to 90GB at around 50% patched and...

> controlnetxlCNXL_bdsqlszLineart.safetensors working for me with a Pony realistic merge and with a Lightning model. Also canny, lineart, depth tested with promax controlnet - all working correctly. Bizzare. Do you...

> I tried some different images resolutions up to 1024x1536, and different controlnet resolutions (512, 648 and 1024). DPM++2M SDE and then others. Also batch and single image. Fully updated....

Tested with both controllllite_v01032064e_sdxl_canny_anime [8eef53e1] and controlnetxlCNXL_bdsqlszLineart [74db2627]. The latter seems to be low quality, but I am not sure if that is an issue of the controlnet implementation or...

> That's interesting to hear, I did notice during testing that Pony based models did not work very well with bdsqlsz models, whereas models like Protovision worked much better. I'd...

Hello, I made an account to speak about this issue. It is very frustrating, but I've at least found out a bit about it. It isn't related to xformers, as...

In case anyone doesn't know the actual commands to do so, I just ran this in the root dir of my webui install. ``` call venv/Scripts/activate.bat pip install torch==2.0.1 torchvision==0.15.2...

I haven't seen that one before. You don't necessarily need to roll back cuda, you just need to make sure Cuda 11.8 is installed. *In other words, at least for...

> Thank you for this solution, it works well! Interestingly, it began when I switched my graphics card from 1070 to 3060. I could generate 1-2 times and then crash...

#15175 I found an issue that seems to be heavily or directly related to this. It seems it's definitely some combination of an issue with how sd-webui is handling SDXL...