AlexxIT
mse: streams: wrong user/pass
Getting unauthorized/wrong user/pass, but the RTSP url is tested and working in VLC. Stopped working last night after camera local IP address changed (updated in config). Credentials are correct.
TP Link Tapo C110
Suspect this is the underlying same issue as #1065 which spontaneously resolved itself.
Trace level logs:
2024-06-20 19:20:18.796565674 19:20:18.796 TRC [rtsp] client response:
2024-06-20 19:20:18.796567272 RTSP/1.0 401 Unauthorized
2024-06-20 19:20:18.796568051 Cseq: 2
2024-06-20 19:20:18.796568951 Date: Thu, Jun 20 2024 19:20:18 GMT
2024-06-20 19:20:18.796569810 Www-Authenticate: Basic realm="TP-Link IP-Camera"
2024-06-20 19:20:18.796570527
2024-06-20 19:20:18.796571226
2024-06-20 19:20:18.796572249 19:20:18.796 TRC [streams] skip prod=rtsp://Username:[email protected]/stream1 error="wrong user/pass"
2024-06-20 19:20:18.796573033 19:20:18.796 DBG [streams] can't stop none producer
2024-06-20 19:20:18.796590968 19:20:18.796 WRN [rtsp] error="streams: wrong user/pass" stream=birdfeeder
2024-06-20 19:20:18.796591768 19:20:18.796 TRC [rtsp] server response:
2024-06-20 19:20:18.796592509 RTSP/1.0 404 Not Found
2024-06-20 19:20:18.796593172 Cseq: 2
Same issue, but started when i reset and connected my camera to a new network. I did the same to another camera but it was fine.
I have tapo c100
Interestingly, I can play the stream fine with ffplay on my computer, but on my server the command fails with 401 unauthorized
There can't be any magic here. Login/password is wrong. Sometimes illegal characters are used in the password. Which must be escaped in the go2rtc configuration (urlencoding).
I have the same issue. What did you do to resolve this? Multiple camera reboots have not helped.
It was just the wrong password too many times locking things out for 24 hours. Had to turn everything off and it started working again a day later.
On Mon, Nov 4, 2024 at 2:22 AM partytimeexcellent @.***> wrote:
I have the same issue. What did you do to resolve this? Multiple camera reboots have not helped.
— Reply to this email directly, view it on GitHub https://github.com/AlexxIT/go2rtc/issues/1217#issuecomment-2453678126, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADMAI53VLM3X2Q5TYR4X56TZ62455AVCNFSM6AAAAABJUR45SKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGY3TQMJSGY . You are receiving this because you authored the thread.Message ID: @.***>