XiaomiGateway3
XiaomiGateway3 copied to clipboard
AlexxIT
sensor.illuminance lumi.sen_ill.mgl01 GZCGQ01LM
brightness sensor much less precise since deposit 1.6.2
I also specify that I have upgraded the firmware 1.5.1_0032
https://ibb.co/6gSB9Vh
2021-11-25 13:37:40 DEBUG gateway3 192.168.1.34 | lumi.4cf8cdf3c7d0ded lumi.sen_ill.mgl01 <= {'0.3.85': 166} [0.01]
mi home android :
https://ibb.co/dp80scb
Home assistant :
https://ibb.co/BqwzMB2
done and well working :-).
Thank you very much for your work and quick response!!!
Is downgrading the gateway firmware the only solution? If so how can I do the downgrade?
If so how can I do the downgrade?
https://github.com/zvldz/mgl03_fw/tree/main/firmware
Thanks @zvldz, It works and I get illuminance updates right away. :)
Battery stíll doesn't update. Is this a known issue, or is there a fix for that too?
Battery stíll doesn't update. Is this a known issue, or is there a fix for that too?
Both should have worked. I think the problem is in fw, we have to wait for a newer one and then see what happens.
It seems that problem take a place after upgrading to 2nd version of the component even on 1.5.0_0102's version firmware. Can anyone confirm that?
It seems that problem take a place after upgrading to 2nd version of the component even on 1.5.0_0102's version firmware. Can anyone confirm that?
I did not have any problem following the update, the data is uploaded 5-10 minutes later without restarting
It seems that problem take a place after upgrading to 2nd version of the component even on 1.5.0_0102's version firmware. Can anyone confirm that?
I did not have any problem following the update, the data is uploaded 5-10 minutes later without restarting
Yup in the daylight it give normal values (about 100). I was checking at the night while turn on the light in the room and sensor gave value 20 which lead me to suspicion that problem get back. It's kinda odd that my room light give 5 times less illuminance than faint winter morning light.
Battery stíll doesn't update. Is this a known issue, or is there a fix for that too?
I see same behaviour for battery (illuminance working fine). Paired two new GZCGQ01LM sensors to my two ZHWG16LM (4.0.1_0001) gateways and both still show Unknow value for Battery. XG3 integration is v3 release. Mihome says batteries is Normal. Anybody seen anything in Battery values for these sensors? May be Battery will come up only when it become a low value?
