Issue with SNZB-06P Sensor Status Post-Update of SonoffLAN at v3.7.3

[Mike76Mer]

          Issue with SNZB-06P Sensor Status Post-Update of SonoffLAN at v3.7.3

@AlexxIT I’ve encountered a persistent issue where the status of my SNZB-06P sensors is no longer visible, although the RSSI remains accessible. This problem surfaced following the most recent update. Prior to this, the status of my three SNZB-06P sensors was displayed without any complications. It seems that the update may have inadvertently affected the sensor status visibility within the system.

I don't know if it can be useful, but the three devices are all associated with a ZBBridge-P

Originally posted by @atlaspl in https://github.com/AlexxIT/SonoffLAN/issues/1245#issuecomment-2134068446

[Mike76Mer]

Same problem here, I'm new to the community. Is there another report where I can get support?

This issue seems closed (#1245).

Thank you.

[tinker-tillit-works]

I have the same issue since upgrade to 3.7.3, my SNZB-06P now shows status of unknown. I needed to change the logic to use an Ewelink Scene since the status is not reported anymore.

[cpmarexel2f]

I have the same problem....Only RSSI SNZB-06P is available.

[AlexxIT]

#1245 not closed yet