更多分辨率支持

[Alex-Beng]

[sddiky]

即使暂时不支持更多分辨率，也可否提供跳过分辨率检测的功能（比如在config.json中设置）？ 我尝试在yap正常打开后再把分辨率调回全屏（2560x1600，如果先全屏就打不开yap），拾取功能还是可以用的。 如果能提供这个功能我就不用来回切分辨率了…

[Alex-Beng]

@sddiky 1. 拾取时候识别区域的参数是跟分辨率强相关的。2. yap基于启动时的分辨率和窗口位置进行检测，并不会在后续运行时检测分辨率和位置。所以能跑起来大概是16:9和16:10的识别区域比较接近，实际上是不支持的。PS：例如UID遮罩位置肯定是错的。

如果可能的话，欢迎提供16:10分辨率的以下全屏截图：

1. 包含多个拾取物且带有F图标
2. 上方包含 联机匹配邀请/进入世界申请 PS：注意遮UID，以避免风险。 这样能让yap直接支持16:10

[sddiky]

(image removed)

希望能帮到后续的开发。 我自己暂时用不上了，电脑硬件性能不足，开了之后掉帧T_T

感谢。

[Alex-Beng]

已支持16:10的部分拾取、摁Y、UID遮罩功能，其他功能暂未支持。可使用nightly 28及更新的版本协助测试

[revy-git]

@sddiky1. The parameters of the recognition area during picking are strongly related to the resolution. 2. yap detects based on the resolution and window position at startup, and ** will not detect the resolution and position during subsequent runs ** . Therefore, the recognition areas of 16:9 and 16:10 are relatively close to each other, but in fact they are not supported. PS: For example, the UID mask position is definitely wrong.

If possible, you are welcome to provide the following full-screen screenshots in 16:10 resolution:

1. Contains multiple pickups and has an F icon

2. The above contains online matching invitation/world entry application 
   PS: Be careful to cover the UID to avoid risks. 
   This allows yap to directly support 16:10

hi, id like to request 21:9 (3440x1440) support too.

here are pictures you mentioned, if i understood corrrectly: if i did something wrong tell me, "UID" is hidden

"G" "F" "F" "G" co-op world join map stuff

note, genshin has small bug right now where if you want ui to look correctly at 3440x1440 (21:9), you have to start it at 16:9 aspect ratio, and change resolution in settings then, otherwise its weirdly offset slightly you can see in thesepicture what i mean

[revy-git]

ok i tried to add myself but i dont know programming

i added window_info.rs

pub const WINDOW_21_9: WindowInfo = WindowInfo {
    width: 3440.0,
    height: 1440.0,

    f_area_pos: Rect(450.0, 2155.0, 990.0, 2068.0),
    f_template_w: 72.0,
    f_template_h: 50.0,
    
    pickup_x_beg: 2235.0,
    pickup_x_end: 2615.0,
    pickup_y_gap: 97.0,

    artifact_put_in_x: 3216.0,
    artifact_put_in_y: 1025.0,
    artifact_upgrade_x: 1750.0,
    artifact_upgrade_y: 1020.0,
    artifact_skip_x: 170.0,
    artifact_skip1_y: 200.0,
    artifact_skip2_y: 295.0,

    online_challange_pos: Rect(61.0, 1894.0, 103.0, 1580.0),
    online_challange_confirm_x: 2210.0,
    online_challange_confirm_y: 490.0,

    uid_pos: Rect(1406.0, 3366.0, 1434.0, 3126.0),

    tp_botton_pos: Rect(1300.0, 3433.0, 1388.0, 2790.0),

main.rs

    else if rect.height * 215 == rect.width * 90 {
        info = info::PickupInfo::from_21_9(rect.width as u32, rect.height as u32, rect.left, rect.top);
    } 

and few other places

uid hider = works auto teleport = does not work item pickup = 1st item very slow pickup, then others fast

not sure what im doing wrong

[Alex-Beng]

thanks. I currently have no time in this project. I'm trapped in my master paper and go nowhere.