Aircoookie
Flickering on 6th segment on WS2805 BTF strip after 30 brightness
What happened?
I've noted on my setup and testing with B2 and WS2805 strips from BTF that any brighter than 30 brightness there is distinct flickering on the 6th segment on multiple cut strips (all 7 segments long) but NOT on strips that are 6 segments long. I've run the strip[s in multiple series (ie different series of 6/7 segment strips( and this always affects the 7 segments but starts to affect the 6 segment (on segment 5 aka one before the end) when 80% bright on any effect.
To Reproduce Bug
Turn strips up over 30 brightness in any effect setting.
Expected Behavior
no flickering at all
Install Method
Binary from WLED.me
What version of WLED?
WLED V .15.0-b2
Which microcontroller/board are you seeing the problem on?
ESP32
Relevant log/trace output
No response
Anything else?
No response
Code of Conduct
- [X] I agree to follow this project's Code of Conduct
Sounds like a possible power delivery issue. I might be wrong but I would make sure the strips are getting enough amperage/voltage to run reliably.
On Mon, Apr 8, 2024, 4:17 p.m. Lydell Moore @.***> wrote:
What happened?
I've noted on my setup and testing with B2 and WS2805 strips from BTF that any brighter than 30 brightness there is distinct flickering on the 6th segment on multiple cut strips (all 7 segments long) but NOT on strips that are 6 segments long. I've run the strip[s in multiple series (ie different series of 6/7 segment strips( and this always affects the 7 segments but starts to affect the 6 segment (on segment 5 aka one before the end) when 80% bright on any effect. To Reproduce Bug
Turn strips up over 30 brightness in any effect setting. Expected Behavior
no flickering at all Install Method
Binary from WLED.me What version of WLED?
WLED V .15.0-b2 Which microcontroller/board are you seeing the problem on?
ESP32 Relevant log/trace output
No response Anything else?
No response Code of Conduct
- I agree to follow this project's Code of Conduct
— Reply to this email directly, view it on GitHub https://github.com/Aircoookie/WLED/issues/3891, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHBFDCVOMFCY3OJ5MAP3FPTY4L3OFAVCNFSM6AAAAABF5KX4HOVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZTEMBQHE2DKNY . You are receiving this because you are subscribed to this thread.Message ID: @.***>
