Alexei Chetroi
Alexei Chetroi
I don't know about jeedom. The difference is the serial port baudrate settings. ELR023's default firmware uses 115200 baudrate, HUSBZB-1 uses 57600 by default. Functionally no difference, but the host...
The problem you are seeing is not related to the firmware itself. Try again. If it fails exactly same way, and it stays in bootloader menu, you could try uploading...
If you know how, then use a serial terminal and upload it manually while it is still in bootloader mode. Connect on 115200, software flow control and pressing enter you...
so, this looks like two different problems: 1. What is the zigate API for the Zigate to start receiving multicast (group) messages? e.g. for EZSP/XBee you have to "subscribe" to...
or we could keep it simple, just as a version number and having a policy for the app to support current_version - 2 backward compatibility. After all it is not...
I didn't have the need to set manufacturer Id for ConBee. Aqara stayed connected just fine. But you do need the new firmware
Yeah, that was tested with the new Aqara. There's no API for that, because it is very radio specific.
zeroconf discovery is outside zigpy scope. Could be implemented by radio, but ATM probably ~~should be~~ the best to be implemented in ZHA integration.
> to make initial discovery + setup of networked Zigbee radio adapters in ZHA easier Exactly. And I think we've discussed this already, but Zigpy is just a library for...
You would get more feedback by asking on discord channel. This firmware works with 0.115.2