NodeRedEPEverDashboard
NodeRedEPEverDashboard copied to clipboard
AdamWelchUK
A node red based dashboard for most EPEver/EPSolar solar charge controllers.
Hi, is it possible to use one USB RS485 Adapter with two Epever in parallel? I trying it for several hours now, but i´m failing ;) My Raspi is not...
Hello Adam, thank you for your hard work. I have a connection problem. I am using epever tracer 3210an, a RS485 USB cable and a RASPI 3b. I installed Node-Red...
New dashboard with several modifications such as rounding values to 2 digits after the dot. see daily, monthly, annual, total kwh generated and consumed. etc. and in French .csv file...
Hiya, First, massive thank you. This library/setup is vastly better than the "official" apps for the eBox module. The directions below were pulled from a few places and figured newer...
Hi Adam, many thanks for your code which I use with a Tracer 2210AN. In my cabin, the temperature can fall below zero C in winter. I found the Tracer...
I have started using you dashboard today, but I wonder if the graphs for solar & batt power need some adjustment, because sometimes they appear to report a value way...
Changes made from v0.5 from dtabone - Line 115, under Name in JSON: ` "name": "EPEver Dashboard",` field is where you can replace with your own dashboard name prefix -...
- Fixed some field types for Battery Status - Added device data & time (read only for now) - [EPEverDashboardv0.4.json.zip](https://github.com/AdamWelchUK/NodeRedEPEverDashboard/files/6668038/EPEverDashboardv0.4.json.zip)
Looking over this and it seems to make sense to update the unit's time and date when writing out the settings data.
Tried for hours to get information from this modbus register data. Couldn't find on other projects too. Would be useful to include at least D3-2 (show the current status of...
Metadata
Owner
Metadata
A node red based dashboard for most EPEver/EPSolar solar charge controllers.