AdamMulica

Hello, i search this #define FIL_RUNOUT_PIN PA4 // MT_DET - that is, a white socket on the motherboard with 3 pins #define NUM_RUNOUT_SENSORS 1 or 0 - on/off ? I...

Well, you can only wait for your SD slot to collapse completely. I also had a problem with the SD port 2 times. And it hasn't been working for a...

#define FIL_RUNOUT_ENABLED_DEFAULT true I have to enter here "false"

I have //#define FILAMENT_RUNOUT_SENSOR and don't work :( 

Yes a i have a filament runout sensor. I unplugged the cable and then nothing.

hello, @Malderin I unplugged the cable from the motherboard. The PAUSE option appeared as he described it @daniel78ktn but...  ...does not heat the table and hotend. Time flies but...

When i use printed from USB this work...  

@daniel78ktn I changed 2 parameters: #define TFT_480x320_SPI and #define USE_WIFI_FUNCTION 0 I had to set wifi to 0 because an error popped up during compilation and now the printer prints...

Hello, I downloaded all the content from makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.  I compiled everything from scratch. And as you can see it works. Prints without problems. I only have to check the...

@Sergey-70 what's your printer model? enter your e-mail address, I will try to help.