Abasz

I dont think this post says which is ground and which is signal. I suspect they are the other way around, but I may try to measure it with a...

In my opinion it should work. Based on the picture I think this is connected directly to the flywheel. This should mean that it has the same motional characteristics as...

> @Abasz I believe the magnetic breaking is purely mechanical. Turning the wheel with the orange circle reduces/increases the distance between the silvery magnetic quarter-circle (to the right of the...

> I've finally got some courage to open it up and see inside. > > The handle wheel is one-way coupled with the flywheel, when you pull the handle it...

I think this is a timeout issue when the BLE wants to reconnect but cannot (e.g. because the sensor is already turned off). The error is thrown in upstream code....

I debugged this further, here are the updates and steps to reproduce: Run the following csv in real time loop: [2023-01-15_10-11-17_raw.csv](https://github.com/laberning/openrowingmonitor/files/10419925/2023-01-15_10-11-17_raw.csv) After 1m11s ORM detects full stop and saves logs...

> I would do the latter, and set it to infinity. It is odd, I have some paused rows lately, and I never saw this behaviour. But letting it default...

> ff like time formatting and distance selecting/formatting (have timers count down when there is a target set) should be at the display-end, no of course it should! actually data...

I've implemented the above requested feature: https://github.com/laberning/openrowingmonitor/discussions/126#discussioncomment-5393745 You can find the details in this discussion. Would you be willing to test? What needs to be done is to switch to...

I did not encounter this undefined bug. Can you please open devtools in the browser (in chrome and many other its F12, mobiles do not have it though) and see...