ASELSTM comments

Results 217 comments of


                                            ASELSTM

Add SPI45 to HAL_RCCEx_GetPeriphCLKFreq.

Hi @iabdalkader, The issue you reported has been fixed in the frame of version v1.11.0 of the STM32CubeH7 published on GitHub. Thank you again for having reported. With regards,

SystemCoreClockUpdate() wrong value for STM32F030xC running PLL

Hi @pavel-kucera-ing, According to the reference manual **RM0360** page 91, the STM32F030xC supports `HSI/PREDIV` so the proposed fix is not aligned with the specification. As this issue is invalid, please...

SPI45 PCLK clock source macros are mislabeled.

Hi @iabdalkader, The issue you reported has been fixed in the frame of version v1.11.0 of the STM32CubeH7 published on GitHub. Thank you again for having reported. With regards,

ADC clock frequency greater than maximum allowed and LL_ADC_StartCalibration never called in STM32H723ZG example

Hi @fivdi, Referring to the ADC Clock scheme within reference manual [RM0468](https://www.st.com/resource/en/reference_manual/rm0468-stm32h723733-stm32h725735-and-stm32h730-value-line-advanced-armbased-32bit-mcus-stmicroelectronics.pdf) Figure 161, a clock divider factor of 2 is applied by default to the clock provided to the...

SPI example using DMA: Add cache maintenance operation or separate dma_buffer section

Hi @robamu, The SPI examples are actually running well on default STM32H743ZI nucleo board configuration (without an L3GD20h gyroscope sensor). So, Please feel free to add the required maintenance cache...

HAL_UART_Receive_IT either captures more data than requested or does not capture data in certain conditions.

Hi @rxa1031, Would you please try to check with the latest version of the STM32CubeH7. Please allow me then to close this thread. You may reopen it at anytime if...

BSP USART1 pins should be PA9 and PA10 for STM32H747I-DISCO

Hi @VictorTagayun, Thank you for your contribution. This issue has been fixed in the frame of version v1.11.0 of the STM32CubeH7. Please allow me then to close this thread. With...

Missing implementation of HAL SPI master automatic SUSP in receive mode

Hi @savinz, Thank you for your contribution. This issue has been fixed in the frame of version v1.11.0 of the STM32CubeH7. Please allow me then to close this thread. With...

I2S: I2S_InitTypeDef doesn't have IOSWP

ST Internal Reference: 149516

Bad modification in stm32f1xx_hal_adc_ex.c

Hi @CanastraRF, Our development team has unfortunately declined your proposal. According to them, the use of `memset()` would imply the use of C library within the HAL/LL drivers, which is...