ARCW

I found this bug because there is no "interface_i2s->interface_drv.write_command" function in "scr_interface_driver.c" for SPI or I2C interfaces.When using LCD_WRITE_CMD, the macro definition of g_lcd_handle.interface_drv->write_command causes an error. Please fix this...

> dd bs=4 count=1 if=/dev/ 还是卡主了  或者您能给一个应用interrupt的上位机例程吗，我的上位机程序应该是没有问题的，cat /dev/interrupt 可以看到中断已经触发，但是上位机该如何检测到这个中断请求，有没有别的办法

Thank you for your reply. I know this approach. I did the same thing, but when I read this handle, the program doesn't return anything and keeps waiting. I tried...

My FPGA firmware is generated interrupts. I saw through debugging that the `usr_irq_req ` was pulled up, and after a few clock cycles the `usr_irq_ack ` responded by pulling down...

[xiaomi_gateway3-6d4f45eb86975739da6008732c92bb64-PTX BLE Wireless Switch-43e6caba41f22e6fd73352d7a6d33d9a-3.json](https://github.com/AlexxIT/XiaomiGateway3/files/15029001/xiaomi_gateway3-6d4f45eb86975739da6008732c92bb64-PTX.BLE.Wireless.Switch-43e6caba41f22e6fd73352d7a6d33d9a-3.json)

I think the reason is that the gateway3 plug-in does not support this device. PTX wireless switch is a substitute for Xiaomi button(XMWXKG01LM), which is normally used in Xiaomi APP

 This is the Xiaomi APP showing my device and it still works

I tried it, but nothing changed, and I don't know if it's the problem with this PTX device

I have fixed this bug. My Homeassistant is connected to the router, but the Mijia gateway is connected to other devices, although the same subnet, but there will be problems.

If I have upgraded the firework to 2.0.7.xxx, can I still access HA?